The proper way would be a event rule. This is what it is made for..
Regards,
Christian Schneider
Enterprise Service Specialist
4-tune GmbH
Sägereistrasse 29
CH-8152 Glattbrugg
Tel +41 71 930 07 00
Fax +41 71 930 07 01
Mob +41 79 418 45 42
Mail [email protected]
Am 18.03.2009 um 17:33 schrieb "MARK CRING" <[email protected]>:
Hi,
Put the individual port in Maintenance. This is one way I know how
to do it:
Select the switch or device in Topology, and on the Component detail
pane, click the Interfaces tab - select the port that is bouncing.
Right click, and click on Component detail, and under General
Maintenance, change In Maintenance to Yes. This puts only that port
in Maintenance.
Another thing you can do with Cisco devices that will help is config
the port with "no snmp trap link-status" if you don't want link up/
down traps from that port.
Hope that helps!
Best regards,
C. Mark Cring
Ohio Job and Family Services
Network Administration
[email protected]
phone: 614-387-8217
<[email protected]> 3/18/2009 12:08 PM >>>
Hello all..
We have an issue with a port bouncing up/down about every minute.
How does everyone deal with the excessive alarms in SPECTRUM ???
Thanks
Please consider the environment before printing this e-mail.
This e-mail and any attachments are confidential and may also be
privileged. If you are not a named recipient, or have otherwise
received this communication in error, please delete it from your
inbox, notify the sender immediately, and do not disclose its
contents to any other person, use them for any purpose, or store or
copy them in any medium. Thank you for your cooperation. Unpublished
property of OakTree Enterprise Solutions, Inc. Copyright (c) 2009.
---
To unsubscribe from spectrum, send email to [email protected] with
the body: unsubscribe spectrum [email protected]
This e-mail message, including any attachments, is for the sole use
of the intended recipient(s) and may contain private, confidential,
and/or privileged information. Any unauthorized review, use,
disclosure, or distribution is prohibited. If you are not the
intended recipient, employee, or agent responsible for delivering
this message, please contact the sender by reply e-mail and destroy
all copies of the original e-mail message.
---
To unsubscribe from spectrum, send email to [email protected] with
the body: unsubscribe spectrum [email protected]
---
To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]
