There is a default event rule exactly for this ... however there is a bug in 8.1 that means it doesn't work. This should be fixed in SP2 (H15).
So if you are running a version prior to the fix take a look at the file SS/CsVendor/IETF/EventDisp. Prior to the fix the entry for 0x00220007 was as follows 0x00220007 E 50 A 1,0x00220007,U,1 If this is the case then you should change it to be 0x00220007 E 50 A 1,0x00220007,1,U Regards, John -----Original Message----- From: Christian Schneider [mailto:[email protected]] Sent: 19 March 2009 06:51 To: spectrum Cc: spectrum Subject: Re: [spectrum] Bouncing Interfaces The proper way would be a event rule. This is what it is made for.. Regards, Christian Schneider Enterprise Service Specialist 4-tune GmbH Sägereistrasse 29 CH-8152 Glattbrugg Tel +41 71 930 07 00 Fax +41 71 930 07 01 Mob +41 79 418 45 42 Mail [email protected] Am 18.03.2009 um 17:33 schrieb "MARK CRING" <[email protected]>: > Hi, > > Put the individual port in Maintenance. This is one way I know how to > do it: > > Select the switch or device in Topology, and on the Component detail > pane, click the Interfaces tab - select the port that is bouncing. > Right click, and click on Component detail, and under General > Maintenance, change In Maintenance to Yes. This puts only that port > in Maintenance. > > Another thing you can do with Cisco devices that will help is config > the port with "no snmp trap link-status" if you don't want link up/ > down traps from that port. > > Hope that helps! > > Best regards, > > C. Mark Cring > Ohio Job and Family Services > Network Administration > [email protected] > phone: 614-387-8217 > > >>>> <[email protected]> 3/18/2009 12:08 PM >>> > Hello all.. > > We have an issue with a port bouncing up/down about every minute. > How does everyone deal with the excessive alarms in SPECTRUM ??? > > Thanks > > Please consider the environment before printing this e-mail. > > This e-mail and any attachments are confidential and may also be > privileged. If you are not a named recipient, or have otherwise > received this communication in error, please delete it from your > inbox, notify the sender immediately, and do not disclose its > contents to any other person, use them for any purpose, or store or > copy them in any medium. Thank you for your cooperation. Unpublished > property of OakTree Enterprise Solutions, Inc. Copyright (c) 2009. > > > --- > To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > > This e-mail message, including any attachments, is for the sole use > of the intended recipient(s) and may contain private, confidential, > and/or privileged information. Any unauthorized review, use, > disclosure, or distribution is prohibited. If you are not the > intended recipient, employee, or agent responsible for delivering > this message, please contact the sender by reply e-mail and destroy > all copies of the original e-mail message. > > > --- > To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
