Hi, Did you solve your problem? I've checked I'm able to catch configurations from SNMv2c devices.
Have you check you have write permissions with SNMPv2c community? Maybe the device configuration is wrong and your v2c community is read only privileged. When you have your device modeled as SNMPv2c, try to modify "Contact" or "Device Location" in the Information tab -> General Information. Just to check your privileges are ok. Spectrum use the attribute Community_Name (SNMP Community String in Model Information View) as read community string and CommunityNameForSNMPSets (not visible in any OneClick views) for write operations. If CommunityNameForSNMPSets is blank (by default), Spectrum uses Community_Name for read and write operations. Maybe you have a misconfiguration. Regards James. On Wed, Mar 16, 2011 at 1:56 PM, Bütikofer, Fritz (ID) <[email protected]> wrote: > Dear all > > A few days ago we made first steps with Config Manager for all our network > devices and ran into the problem, that with the current setup – where every > device is polled with snmpv2 (because of the 64 bit counters for interface > statistics) – we are not able to collect the current config. > > We have tested this behaviour for several manufacturers: various enterasys > switches and also cisco IOS routers. > > As soon as we switch back to snmpv1, everything works fine and we can then > collect the actual configs of the above mentioned devices. > > So who of you does use snmpv2 for normal polling AND the Config Manager to > collect the running configurations of infrastructure devices ? And could you > give > me advice, in what I did wrong so far ? > > Thank you and best regards, > > --Fritz. > ___________________________ > University of Bern > Computer Services Department > > Fritz Buetikofer > Senior IT Manager > > Gesellschaftsstrasse 6 > CH-3012 Bern > Switzerland > Tel. +41 (0)31 631 3843 > Fax. +41 (0)31 631 3865 > Web. http://www.id.unibe.ch > > > > --- > To unsubscribe from spectrum, send email to [email protected] with the body: > unsubscribe spectrum [email protected] > --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
