Hi James The problem is solved ;-)) I was finally able to capture config from cisco and enterasys devices ... it was my own fault, because of a wrong snmp setup of the v2c part.
Thank you to all who responded. Best regards, --Fritz. On 18.03.2011, at 11:02, James Garthek wrote: > Hi, > > Did you solve your problem? I've checked I'm able to catch > configurations from SNMv2c devices. > > Have you check you have write permissions with SNMPv2c community? > Maybe the device configuration is wrong and your v2c community is read > only privileged. > > When you have your device modeled as SNMPv2c, try to modify "Contact" > or "Device Location" in the Information tab -> General Information. > Just to check your privileges are ok. > > Spectrum use the attribute Community_Name (SNMP Community String in > Model Information View) as read community string and > CommunityNameForSNMPSets (not visible in any OneClick views) for write > operations. If CommunityNameForSNMPSets is blank (by default), > Spectrum uses Community_Name for read and write operations. > > Maybe you have a misconfiguration. > > Regards > James. > > > > On Wed, Mar 16, 2011 at 1:56 PM, Bütikofer, Fritz (ID) > <[email protected]> wrote: >> Dear all >> >> A few days ago we made first steps with Config Manager for all our network >> devices and ran into the problem, that with the current setup – where every >> device is polled with snmpv2 (because of the 64 bit counters for interface >> statistics) – we are not able to collect the current config. >> >> We have tested this behaviour for several manufacturers: various enterasys >> switches and also cisco IOS routers. >> >> As soon as we switch back to snmpv1, everything works fine and we can then >> collect the actual configs of the above mentioned devices. >> >> So who of you does use snmpv2 for normal polling AND the Config Manager to >> collect the running configurations of infrastructure devices ? And could you >> give >> me advice, in what I did wrong so far ? >> >> Thank you and best regards, >> >> --Fritz. >> ___________________________ >> University of Bern >> Computer Services Department >> >> Fritz Buetikofer >> Senior IT Manager >> >> Gesellschaftsstrasse 6 >> CH-3012 Bern >> Switzerland >> Tel. +41 (0)31 631 3843 >> Fax. +41 (0)31 631 3865 >> Web. http://www.id.unibe.ch >> >> >> >> --- >> To unsubscribe from spectrum, send email to [email protected] with the body: >> unsubscribe spectrum [email protected] >> > > --- > To unsubscribe from spectrum, send email to [email protected] with the body: > unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
