Hi Ali,
I was pretty sure it works only for alarms and not for events. Now I am not so sure because I had a look at the number of Alarms displayed by SANM Policy editor and I had another look at the number of events listed by Event Configuration. To my surprise I found the number to be pretty close. That made me think that SANM could work with Events too. Just create the policy and search for the event you want in "Alarm List" there is a very high chance that your event will be there. If you find it in the list - bingo! J Eugen From: Aliabbas Syed [mailto:[email protected]] Sent: Wednesday, 20 July 2011 6:20 AM To: Naiman, Eugen Subject: RE: [spectrum] Is possible create a Event which to launch an script? This solution is for Alarms only, right? not for Events. Thanks / Cheers, Ali ________________________________ From: Naiman, Eugen [mailto:[email protected]] Sent: Thursday, July 14, 2011 7:10 PM To: spectrum Subject: RE: [spectrum] Is possible create a Event which to launch an script? Hi Diego, As far as I know it is not possible for an event/alarm to trigger a script execution directly. But, there is a solution. The solution involves Spectrum Alarm Notifier. You can create a policy (the filtering options are very good so you can make it as exact as you want) and when the conditions are met, SANM will take over via SetScript, ClearScript and UpdateScript. The default action for these scripts is to send an email but you can replace the "mail" part with your app. Read the manual, because the procedure is explained in detail, and be prepared for trial-and-error. You will get it working in the end. Eugen From: Diego Pereyra [mailto:[email protected]] Sent: Friday, 15 July 2011 3:44 AM To: spectrum Cc: spectrum Subject: Re: [spectrum] Is possible create a Event which to launch an script? Hi susana I dont find if is posible launch an script thought and event, but yes is posible launch it using watchs. Have u try it ? Bye and good luck Pereyra Diego Netsol International On 07/14/2011 04:52 AM, susana jimenez wrote: Hi,list, Is possible create a Event which to launch an script? Regards, Susana --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] -- <http://www.netsol-international.com/> Pereyra Diego System Engineer Esmeralda 684, Piso 10(C1007ABF) Ciudad de Buenos Aires Argentina Web: E-mail: Voice: http://www.netsol-international.com <http://netsol-international.com/> [email protected] <mailto:[email protected]> +54 11 5031 1162  --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission. If the transmission contains advice, the advice is based on instructions in relation to, and is provided to the addressee in connection with, the matter mentioned above. Responsibility is not accepted for reliance upon it by any other person or for any other purpose. * --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] ________________________________ NOTICE: The information contained in this electronic mail transmission is intended by Convergys Corporation for the use of the named individual or entity to which it is directed and may contain information that is privileged or otherwise confidential. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email or by telephone (collect), so that the sender's address records can be corrected. --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
<<image001.jpg>>
<<image002.jpg>>
