Hi Daniel! Thank you so much for sharing your method! I can definately use some of the algorithms from that file... I have one comment about the last step, in case you run into a three cycle.
For a 3-cycle on the F face, like the ones on page 14 (at the bottom), try this: delta = R' / DR' / R epsilon = R' / DR / R algorithm: D / F / delta / F / epsilon / F2' / D' This way you need to insert/remove a corner only twice, using a setup move ;). Bye!! Joël. --- In [email protected], "Daniel Hayes" <[EMAIL PROTECTED]> wrote: > > Here's my MM solution: > http://members.cox.net/swedishlf/Megaminx%20Solution.doc > > MS word document, kinda big. If anyone wants to put this up somewhere > more accessible, feel free. > > -Daniel > > --- In [email protected], "David " > <ladartfrog@> wrote: > > > > Anyhow, apparently megaminx algs are harder to find online than 3x3 > > algs... I did some searching and found one site which explained how to > > solve the LL, but to me it seemed really ineffective. Could anyone > > give me a link to a megaminx LL solution? All I really need is a list > > of the algs. I want a basic 4LLL, and I don't want to learn something > > and later find out that it'[s a bad system, so I figured I'd just ask. > > > > (also, if you have any tips for the minx pre-LL, feel free to give > > those too!) > > > > Thanks! > > > > David > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
