Look at this thread: http://games.groups.yahoo.com/group/speedsolvingrubikscube/message/27 014
Maybe it helps when you use Macky's page to assable your cube again... Did you try to assamble it by sqeezing the last few pieces in? Because that's awkward to do, and it will result in a not-working- 4x4. - Joël. --- In [email protected], David Pritts <[EMAIL PROTECTED]> wrote: > > i JUST bought the 4x4 eastsheen minicube. when I opened it up to lube it, I hadn't planned on taking out any pieces... but, when I did so, it ended up knocking a few pieces out. I had to take an hour or so to re-assemble the cube. When I was done, i was extremely happy.. it turned great. > > Today the cube was dropped from approximately 3 ft up onto carpet (NOT by me), and afterwards, it stopped working. U turns work, D works, L, R, F, B, etc all work. However, I could not turn horizontally at the middle. IE, I could not do any u or u' moves. > > I took off all the center caps. i tried to figure out what was wrong. I noticed that when all the center caps are off, you can see through between adjacent sides. However, between the L and F faces, it seemed there was a piece jiggling around in there, and I could not see through as I could on every other edge. > > I tried to fix it. I couldn't.., all that I was able to do was end up knocking out tons of pieces, and evnetually I decided to start ALL over. I disassembled the cube completely. > > I reassembled it. It took THREE HOURS. When I was done, after a little bit of tightening and adjustment, the cube worked great.I was then playing with it a little bit (using it to simulate a 2x2 cube, so I was doing only r, l, u, d, moves, etc), when all of a sudden, I noticed that the same problem was happening again!!!!!!!!!! > > im about to try and fix it, but arrrrgghh!! what do I do?? > > David > > > --------------------------------- > Yahoo! Mail > Use Photomail to share photos without annoying attachments. > > [Non-text portions of this message have been removed] > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
