Hi :-) You can also check my page :
http://vakt.idi.ntnu.no/apartment/EastSheen_4x4x4.htm Cheers! -Per > --- In [email protected], Joël van Noort <[EMAIL PROTECTED]> wrote: > > Look at this thread: > > http://games.groups.yahoo.com/group/speedsolvingrubikscube/message/27 > 014 > > Maybe it helps when you use Macky's page to assable your cube > again... > > Did you try to assamble it by sqeezing the last few pieces in? > Because that's awkward to do, and it will result in a not-working- > 4x4. > > - Joël. > > --- In [email protected], David Pritts > <ladartfrog@> wrote: > > > > i JUST bought the 4x4 eastsheen minicube. when I opened it up to > lube it, I hadn't planned on taking out any pieces... but, when I > did so, it ended up knocking a few pieces out. I had to take an hour > or so to re-assemble the cube. When I was done, i was extremely > happy.. it turned great. > > > > Today the cube was dropped from approximately 3 ft up onto > carpet (NOT by me), and afterwards, it stopped working. U turns > work, D works, L, R, F, B, etc all work. However, I could not turn > horizontally at the middle. IE, I could not do any u or u' moves. > > > > I took off all the center caps. i tried to figure out what was > wrong. I noticed that when all the center caps are off, you can see > through between adjacent sides. However, between the L and F faces, > it seemed there was a piece jiggling around in there, and I could > not see through as I could on every other edge. > > > > I tried to fix it. I couldn't.., all that I was able to do was > end up knocking out tons of pieces, and evnetually I decided to > start ALL over. I disassembled the cube completely. > > > > I reassembled it. It took THREE HOURS. When I was done, after a > little bit of tightening and adjustment, the cube worked great.I was > then playing with it a little bit (using it to simulate a 2x2 cube, > so I was doing only r, l, u, d, moves, etc), when all of a sudden, I > noticed that the same problem was happening again!!!!!!!!!! > > > > im about to try and fix it, but arrrrgghh!! what do I do?? > > > > David > > > > > > --------------------------------- > > Yahoo! Mail > > Use Photomail to share photos without annoying attachments. > > > > [Non-text portions of this message have been removed] > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
