Hello. Perhaps this more a FreeBSD' configuration problem than a problem with the driver itself but maybe you could help me anyway :) When I launch modem_run it can't find my modem. I have compiled the kernel whith usb and ugen options and I also tried with and without the the uhci option. I also tried to load the modules manually with kldload and add 'usb_load="YES"' to my /boot/loader.conf.
Here are some lines of my dmesg : ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f at device 4.2 on pci0 uhci0: Invalid irq 255 uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS device_probe_and_attach: uhci0 attach returned 6 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PNP-OS was already switched to 'No' in the BIOS, I also tried to switch it to 'yes', without success. This a FreeBSD 4.3-RELEASE. My configuration has already been working under Linux and OpenBSD. --------------------------------------------------------------------------- --------------------------------------------------------------------------- Bonjour, C'est surement plus un pb de conf de fribi qu'un pb avec le driver, m'enfin peut-être pourrez-vous m'aider quand même :) Quand je lance modem_run il ne trouve pas mon modem. J'ai compilé le noyau avec les options usb et ugen, et j'ai essayé avec et sans l'option uhci. J'ai aussi essayé de charger les modules avec kldload et d'ajouter 'usb_load="YES"' à mon /boot/loader.conf. Voici un extrait de mon dmesg : ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f at device 4.2 on pci0 uhci0: Invalid irq 255 uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS device_probe_and_attach: uhci0 attach returned 6 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ L'option PNP-OS était déjà sur 'NO' dans le BIOS, j'ai essayé à tout hasard de la mettre sur oui, en vain. Je suis sous FreeBSD 4.3-RELEASE. Ma configuration a déjà marché avec Linux et OpenBSD. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe