On Wed, 2002-07-03 at 23:11, Matthew Pocock wrote:
> On the occasions that this stage works, I see log messages about > timeouts, then modem_run says that the ADSL has synchronized and gives a > download and upload speed. When running pppd (by the way, my ppp > binaries got put in /usr/sbin, not /usr/local/sbin), things go through, > IPs for DNS and local/remote are obtained. However, it says "not > replaced existing default route to eth0 [192.168.0.1]" and this has > caused me all sorts of problems. When I tracked this down (with help > from the #linuxhelp chat), I was able to work around this by using route > to change the default gateway to the remote IP. I then modify the > /etc/resolv.conf file to include the new DNS entries, either by hand or > using neat. At this point, I can ping things by IP, but can't resolve > names. > > I'm running kernel 2.4.18-5smp, and the latest drivers downloaded from > your sourceforge site. I got the latest mgmt.o file from alcatel. I > accepted the default secure firewall options from the redhat install. 2 Things 1. Does your /etc/nsswitch.conf have a dns option in the hosts line ? ie. hosts: files dns I imagine it will do, but worth checking. 2. Is your firewall allowing dns traffic in from BT's name servers?? You could try rerunning the firewall script and it may create entries in line with your /etc/resolv.conf. Alternatively put them in by hand -A input -s 213.120.62.101 53 -d 0.0.0.0/0.0.0.0 -i ppp0 -p 17 -j ACCEPT -A input -s 213.120.62.100 53 -d 0.0.0.0/0.0.0.0 -i ppp0 -p 17 -j ACCEPT Hope this helps Tom Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
