On Wed, 3 Jul 2002, Matthew Pocock wrote: > Hi. > > I use a speedtouch adsl modem, BT broadband and redhat 7.3, and have > been trying your drivers. I have read the howto and been on a couple of > chat rooms trying to get things going. However, I'm still having problems. > <snip> > On the occasions that this stage works, I see log messages about > timeouts, then modem_run says that the ADSL has synchronized and gives a > download and upload speed. When running pppd (by the way, my ppp > binaries got put in /usr/sbin, not /usr/local/sbin), things go through, > IPs for DNS and local/remote are obtained. However, it says "not > replaced existing default route to eth0 [192.168.0.1]" and this has > caused me all sorts of problems. When I tracked this down (with help > from the #linuxhelp chat), I was able to work around this by using route > to change the default gateway to the remote IP. I then modify the > /etc/resolv.conf file to include the new DNS entries, either by hand or > using neat. At this point, I can ping things by IP, but can't resolve > names. > You (probably) shouldn't have a default route on the box that connects to the internet. Remove/comment the "GATEWAY=192.168.0.1" line from /etc/sysconfig/network.
DNS check /etc/resolv.conf. I don't think that pppd replaces it, it creates its own copy. You have several solutions possible. 1. symlink /etc/resolv.conf to /etc/ppp/resolv.conf (I think). 2. Hard code the dns servers into /etc/resolv.conf (I use 194.73.73.94 and 194.73.73.95 or 3. Set up a DNS server locally. (I do this and use the BT servers as forwarders to reduce the load on the root servers but means that I don't suffer from their unreliability) Also check if you installed a firewall. Maybe DNS traffic is firewalled. Does RH7.3 install iptables or ipchains. If ipchains then DNS is probably firewalled as UDP is hard/impossible to filter properly using a packet filter. > I'm running kernel 2.4.18-5smp, and the latest drivers downloaded from > your sourceforge site. I got the latest mgmt.o file from alcatel. I > accepted the default secure firewall options from the redhat install. > I should read before I write :-) Probably a firewall problem. Try /etc/init.d/ipchains stop or /etc/init.d/iptables stop and see if that fixes things. (If it does then you need to sort out the firewall as the above disable it completely which you really don't want on adsl.) Finally, are you running apache or openssh. If so please upgrade them before you get hacked. AFAICT apache on linux and openssh on RH (default install) have, as yet no known way to exploit them but apache on *bsd was believed safe as well until a (brilliant but annoying) piece of work by gobbles. upgrades can be got from ftp://updates.redhat.com - or ftp:://ftp.mirror.ac.uk/sites/ftp.mirror.ac.uk which tends to be faster but 1/2 to 1 day behind updates.redhat.com. I think RH now has an automatic upgrader as well but I like to do these things manually so that I know what has changed. Regards, Tim. -- God said, "div D = rho, div B = 0, curl E = - @B/@t, curl H = J + @D/@t," and there was light. http://tjw.hn.org/ http://www.locofungus.btinternet.co.uk/ Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
