----- Original Message ----- From: "Arnaud QUIRIN" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 11, 2003 11:04 PM Subject: [speedtouch] Re: Pb de connexion, "Network is unreachable"
> Hello, > > I translate my previous email for english speakers.... > I have just installed my modem USB SpeedTouch while > following the instructions of the following pages: > > http://www.ze-linux.org/howto.html?id_docs=34&id_docs_page=154 > http://cvs.sourceforge.net/viewcvs.py/*checkout*/speedtouch/speedtouch/doc-l inux/howto/SpeedTouch-HOWTO-fr.html?rev=1.3 > http://people.via.ecp.fr/~jm/divers/speedtouch.html > > This is my config: > > (Debian woody 3.0) > bigbang:~# uname -a > Linux bigbang 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST > 2002 i586 unknown > bigbang:~# pppd --version > pppd version 2.4.1 > bigbang:~# modem_run --help > modem_run version 1.2-beta2: $ > > I use a wanadoo connexion and common parameters for > protocole CHAP, -vpi 8 -vci 35, ... > > The installation of the sourceforge drivers and the > modprobe were held correctly. > > > When I run "modem_run -m -f /usr/local/bin/mgmt.o", I > have to wait a certain amount of time (1min) and then > I have no error messages, even not the common > > "usbdevfs: USBDEVFS_BULK failed". The second green > light of the modem flick then stop flicking. Then the > "pppd call adsl" (what gives no messages). > > All seems to be right, but: > > -------------------------------------------- > bigbang:~# ifconfig ppp0 > -------------------------------------------- > ppp0 Link encap:Point-to-Point Protocol > POINTOPOINT NOARP MULTICAST MTU:1500 > Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 > frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 > carrier:0 > collisions:0 txqueuelen:3 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > -------------------------------------------- > > With no IP before "POINTOPOINT..." > > And a ping on a given IP gives me: > > ping: sendto: Network is unreachable > .... > > -------------------------------------------- > bigbang:~# tail -f /var/log/syslog > -------------------------------------------- > Nov 11 16:11:42 bigbang pppd[405]: sent [LCP ConfReq > id=0xb <asyncmap 0x0> <magic 0x8056d054>] > Nov 11 16:11:43 bigbang pppd[460]: sent [LCP ConfReq > id=0x2 <asyncmap 0x0> <magic 0x3f2b85d9>] > Nov 11 16:11:45 bigbang pppd[405]: sent [LCP ConfReq > id=0xb <asyncmap 0x0> <magic 0x8056d054>] > Nov 11 16:11:46 bigbang pppd[460]: sent [LCP ConfReq > id=0x2 <asyncmap 0x0> <magic 0x3f2b85d9>] > Nov 11 16:11:48 bigbang pppd[405]: sent [LCP ConfReq > id=0xb <asyncmap 0x0> <magic 0x8056d054>] > Nov 11 16:11:49 bigbang pppd[460]: LCP: timeout > sending Config-Requests > Nov 11 16:11:49 bigbang pppd[460]: Connection > terminated. > Nov 11 16:11:49 bigbang pppd[460]: using channel 15 > Nov 11 16:11:49 bigbang pppoa3[476]: pppoa3 version > 1.2-beta2 started by root (uid 0) > Nov 11 16:11:49 bigbang pppd[460]: Using interface > ppp1 > Nov 11 16:11:49 bigbang pppd[460]: Connect: ppp1 <--> > /dev/pts/18 > Nov 11 16:11:49 bigbang pppoa3[476]: A previous > instance seems to be running > Nov 11 16:11:49 bigbang pppoa3[476]: Sending the kill > signal to 406 and waiting... > -------------------------------------------- > > > > -------------------------------------------- > bigbang:~# cat /proc/bus/usb/devices | grep Product > -------------------------------------------- > S: Product=USB OHCI Root Hub > S: Product=Speed Touch USB > S: Product=Back-UPS ES/CyberFort 500 FW: 4.0.I USB > FW: d1 > S: Product=USB UHCI Root Hub > -------------------------------------------- > > > -------------------------------------------- > bigbang:~/speedtouch/speedtouch-1.2-beta2/doc-linux/doctor# > sh speedtouch-doctor.sh > -------------------------------------------- > You are using linux kernel version 2.4.18-bf2.4 > Support for USB is OK > Preliminary USB device filesystem is OK > UHCI support is OK > OHCI support is OK > /dev/ppp is OK > HDLC support is OK > HDLC support is OK (no bug) > /etc/ppp/chap-secrets is OK > pppd version 2.4.1 > You are using pppd version (untested) > You have an /etc/ppp/options file. Options in this > file may conflict with > options from /etc/ppp/peers/adsl. We suggest to remove > this file or make a > backup copy. > No existing PPP connection... trying to make one > (please wait) > using channel 2 > Using interface ppp0 > Connect: ppp0 <--> /dev/pts/4 > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0xdad9e2f0>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0xdad9e2f0>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0xdad9e2f0>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0xdad9e2f0>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0xdad9e2f0>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0xdad9e2f0>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0xdad9e2f0>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0xdad9e2f0>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0xdad9e2f0>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0xdad9e2f0>] > LCP: timeout sending Config-Requests > Connection terminated. > Waiting for 1 child processes... > script /usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci > 35, pid 503 > -------------------------------------------- > > > -------------------------------------------- > bigbang:~# cat /proc/pci > -------------------------------------------- > PCI devices found: > Bus 0, device 0, function 0: > Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev > 1). > Master Capable. Latency=32. > Bus 0, device 1, function 0: > ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 1). > Bus 0, device 1, function 1: > IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev > 1). > Master Capable. Latency=32. > I/O at 0xe000 [0xe00f]. > Bus 0, device 1, function 2: > USB Controller: Intel Corp. 82371AB PIIX4 USB (rev > 1). > IRQ 9. > Master Capable. Latency=32. > I/O at 0xd800 [0xd81f]. > Bus 0, device 1, function 3: > Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 1). > IRQ 9. > Bus 0, device 9, function 0: > Ethernet controller: Intel Corp. 82557 [Ethernet > Pro 100] (rev 8). > IRQ 9. > Master Capable. Latency=32. Min Gnt=8.Max > Lat=56. > Non-prefetchable 32 bit memory at 0xe5000000 > [0xe5000fff]. > I/O at 0xd400 [0xd43f]. > Non-prefetchable 32 bit memory at 0xe4800000 > [0xe48fffff]. > Bus 0, device 10, function 0: > VGA compatible controller: ATI Technologies Inc 3D > Rage Pro 215GP (rev 92). > Master Capable. Latency=32. Min Gnt=8. > Prefetchable 32 bit memory at 0xe6000000 > [0xe6ffffff]. > I/O at 0xd000 [0xd0ff]. > Non-prefetchable 32 bit memory at 0xe4000000 > [0xe4000fff]. > Bus 0, device 11, function 0: > USB Controller: CMD Technology Inc USB0670 (rev > 6). > IRQ 10. > Master Capable. No bursts. Min Gnt=2.Max > Lat=4. > Non-prefetchable 32 bit memory at 0xe3800000 > [0xe3800fff]. > -------------------------------------------- > > If you are still here :), thanks for all your help !!! Check u compiled ur kernel with good uhci usb driver - same hapened to me when i compiled only alternate UHCI driver with no regular UHCI .... And be sure to add PPP filtering to kernel also..... Yacho Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
