Hi At 16:53 10/12/2003 +0100, you wrote: > > I've got exactly the same problems as you, on FreeBSD 4.x (4.8 right > now). I > > still use v1.1 (I tried v1.0 before, and more recently v1.2beta1) > > Have you tried using pppoa3? Not sure about the development on pppoa2, but >even that is already in 1.2beta3. It could quite well be your problems have >already been solved in the newer releases.
Thks. I've upgraded to v1.2-beta3 and got the latest firmware from Thomson. I'll see if things go better from now ;) but I am not so sure :p I keep you in touch. Btw, I'm still using pppoa2, 'cos I can't manage to make pppoa3 work :P (see below) PPP log: Dec 11 00:53:10 mandarine ppp[908]: Phase: Using interface: tun0 Dec 11 00:53:10 mandarine ppp[908]: Phase: deflink: Created in closed state Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: set authname [EMAIL PROTECTED] Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: set authkey ******** Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: set device !/usr/local/sbin/pppoa3 -v 1 -vpi 8 -vci 35 -c -p Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: accept chap Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: set speed sync Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: set timeout 0 Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: set redial 0 0 Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: set reconnect 0 0 Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: set dial Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: set ifaddr 0 0 Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: add default HISADDR Dec 11 00:53:10 mandarine ppp[908]: tun0: Command: club: nat enable yes Dec 11 00:53:11 mandarine ppp[908]: tun0: Phase: PPP Started (foreground mode). Dec 11 00:53:11 mandarine ppp[908]: tun0: Phase: bundle: Establish Dec 11 00:53:11 mandarine ppp[908]: tun0: Phase: deflink: closed -> opening Dec 11 00:53:11 mandarine ppp[908]: tun0: Phase: deflink: Connected! Dec 11 00:53:11 mandarine ppp[908]: tun0: Phase: deflink: opening -> dial Dec 11 00:53:11 mandarine ppp[908]: tun0: Phase: deflink: dial -> carrier Dec 11 00:53:11 mandarine ppp[908]: tun0: Phase: deflink: carrier -> login Dec 11 00:53:11 mandarine ppp[908]: tun0: Phase: deflink: login -> lcp PPPOA3 log: Dec 11 00:53:11 mandarine pppoa3[910]: pppoa3 version 1.2-beta3 started by jeremy (uid 0) Dec 11 00:53:11 mandarine pppoa3[910]: A previous instance seems to be running Dec 11 00:53:11 mandarine pppoa3[910]: No previous instance found Dec 11 00:53:11 mandarine pppoa3[910]: Control thread ready Dec 11 00:53:11 mandarine pppoa3[910]: Modem found! Dec 11 00:53:11 mandarine pppoa3[910]: host --> pppoa3 --> modem stream ready Dec 11 00:53:11 mandarine pppoa3[910]: modem --> pppoa3 --> host stream ready Exactly 16 seconds later, ppp disconnects? Why? Dunno :) PPP log: Dec 11 00:53:27 mandarine ppp[908]: tun0: Phase: deflink: lcp -> logout Dec 11 00:53:27 mandarine ppp[908]: tun0: Phase: deflink: logout -> hangup Dec 11 00:53:27 mandarine ppp[908]: tun0: Phase: deflink: Disconnected! Dec 11 00:53:27 mandarine ppp[908]: tun0: Phase: deflink: Connect time: 16 secs: 0 octets in, 90 octets out Dec 11 00:53:27 mandarine ppp[908]: tun0: Phase: deflink: 0 packets in, 5 packets out Dec 11 00:53:27 mandarine ppp[908]: tun0: Phase: total 5 bytes/sec, peak 7 bytes/sec on Thu Dec 11 00:53:15 2003 Dec 11 00:53:27 mandarine ppp[908]: tun0: Phase: deflink: HUPing 910 Dec 11 00:53:27 mandarine ppp[908]: tun0: Phase: deflink: hangup -> closed Dec 11 00:53:27 mandarine ppp[908]: tun0: Phase: bundle: Dead Dec 11 00:53:27 mandarine ppp[908]: tun0: Phase: PPP Terminated (normal). PPPOA3 log: Dec 11 00:53:27 mandarine pppoa3[910]: Received signal 1 (thread 134561792) Dec 11 00:53:27 mandarine pppoa3[910]: Woken by a sem_post event -> Exiting Dec 11 00:53:27 mandarine pppoa3[910]: Read from usb Canceled Of course, then, I need to delete /var/run/pppoa3-modem1.pid manually. (Byebye ppp -ddial...) Dec 11 00:56:14 mandarine pppoa3[942]: pppoa3 version 1.2-beta3 started by jeremy (uid 0) Dec 11 00:56:14 mandarine pppoa3[942]: A previous instance seems to be running Dec 11 00:56:14 mandarine pppoa3[942]: Sending the kill signal to 910 and waiting... Any idea? jeremy Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
