Selon Hugh Ekeberg <[EMAIL PROTECTED]>: > > > > > > > I am surprised about > > "Dmesg shows: ugen0: ALCATEL Speed Touch USB , rev 1.10/0.00" > > > > I had think for the 530 that Rev 3.00 would be displayed. > > This is according to the windows .inf file. > > This file don't know about a Rev 1.10 modem if I remember well > > > You are correct, I'll rewrite; > Ugen0: ALCATEL SpeedTouch 500 Series, rev 1.10/3.00, addr 2 > Ok so I suppose we should understand : - rev 1.10 look to be something that is specific to BSD (usb driver version ?) - the modem is a Rev 3.00 and should work with * V1.2 driver * a bootloader like boot.v123.bin or KQD6P1.eni * a firmware like mgmt.o/firmware.bin/KQD6P2.eni/alcaudsl.sys (only the big ones BEFORE V3.0x)
> Any idea how to configure them? Maybe to trick a driver into thinking it > is something else? > Do you a laptop, reason you want to use the modem by USB? If you have an ethernet card, you could use this way without a driver need. I don't know anything about BSD. Have you look at the BSD installation guide? Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
