----- Original Message ----- From: "eric tanguy" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, May 16, 2004 8:35 PM Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
> > > > > So modem_run start is OK > > > >> May 16 19:09:38 localhost modem_run[11290]: Another program/driver is > >> already accessing the modem (interface 1 cannot be claimed)... > >> > > There is two drivers : > > - user mode with pppoa3 > > - kernel modem with speedtch module now integrated in standard kernel > > since V2.4.22 > > *********** READ************** > > You can't use both at the same time. ******************************* > > > > I don't know what your script do. > > > > Kernel module should be the best solution when you have it (short and > > strait) > > > > If you use kernel mode driver, you need to start modem_run with a > > different setting ( add -k option pour modem_run command line) If you don't want to use the kernel driver and use pppoa3 - unplug and plug again the modem - modprobe -r speedtch - remove the 'k' option in modem_run start ... > May 16 20:24:35 localhost modem_run[10771]: Found kernel mode driver > May 16 20:25:58 localhost pppoa3[10785]: pppoa3 version 1.2 started by > root (uid 0) > May 16 20:25:58 localhost pppoa3[10785]: Control thread ready > May 16 20:25:58 localhost kernel: HDLC line discipline: version $Revision: > 3.6 $, maxframe=4096 > May 16 20:25:58 localhost kernel: N_HDLC line discipline registered. > May 16 20:25:58 localhost pppoa3[10785]: pusb_claim_interface 1 failed ... Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
