> You need the zzzlp(x) serie with Rev 4.00
> modem_run -v 1 -t 90 -n 4 -f /usr/share/speedtouch/firmware.ZZZLP1.eni
> -a /usr/share/speedtouch/boot.ZZZLP2.eni
> -v 1 display nice informations
> -n 4 is enough attempt to load firmware
> -t 90 avoid to wait to much if you ADSL is brocken, you reboot and your
> connection start automaticaly at boot.
> If you use the kernel driver, you need to :
> - modprobe speedtch
> - run modem_run with adding  -k to other options
> - sleep 5
> I am not usin hotplug, so I don't know to much how it should work.

I'm not sure to well understand
I can't find firmware.ZZZLP1.eni and boot.ZZZLP2.eni but i found
ZZZLP1.eni and ZZZLP2.eni on my winxp and i copied them in
/usr/local/share/speedtouch/
and i ran modem_run -v 1 -t 90 -n 4 -f
/usr/local/share/speedtouch/zzzlp1.eni -a
/usr/local/share/speedtouch/zzzlp2.eni
You said that i have to reboot and my connection would start automatically ?
I tried it but it didn't work.
So I tried to follow the french howto :
I ran modem_run -v 1 -t 90 -n 4 -f /usr/local/share/speedtouch/zzzlp1.eni
-a /usr/local/share/speedtouch/zzzlp2.eni
and
pppd call adsl updetach
and i had these messages :
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
Modem hangup
Connection terminated.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
Script /usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 10565),
status = 0xff
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x35ad9cc3>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x35ad9cc3>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x35ad9cc3>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x35ad9cc3>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x35ad9cc3>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x35ad9cc3>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x35ad9cc3>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x35ad9cc3>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x35ad9cc3>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x35ad9cc3>]
LCP: timeout sending Config-Requests
Connection terminated.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/pts/3
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x4f15c4dc>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x4f15c4dc>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x4f15c4dc>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x4f15c4dc>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x4f15c4dc>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x4f15c4dc>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x4f15c4dc>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x4f15c4dc>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x4f15c4dc>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x4f15c4dc>]
LCP: timeout sending Config-Requests
Connection terminated.
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/pts/4
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc5e895d4>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc5e895d4>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc5e895d4>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc5e895d4>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc5e895d4>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc5e895d4>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc5e895d4>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc5e895d4>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc5e895d4>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc5e895d4>]
LCP: timeout sending Config-Requests
Connection terminated.
using channel 5
Using interface ppp0
Connect: ppp0 <--> /dev/pts/5
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x29749b75>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x29749b75>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x29749b75>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x29749b75>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x29749b75>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x29749b75>]
Terminating on signal 2.
sent [LCP TermReq id=0x5 "User request"]
Child process /usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 (pid 10642)
terminated with signal 2
Child process /usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 (pid 10600)
terminated with signal 2
Child process /usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 (pid 10618)
terminated with signal 2
Modem hangup
Connection terminated.
Waiting for 1 child processes...
  script /usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35, pid 10581
Child process /usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 (pid 10581)
terminated with signal 2

What's the matter ? How to make properly my connection ?
Eric





Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

        

Reply via email to