----- Original Message ----- From: "Duncan Sands" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: "Eduardo Espejo" <[EMAIL PROTECTED]> Sent: Saturday, June 12, 2004 2:30 PM Subject: [speedtouch] Re: ATM loopback
> > > Hi to all, I'm a user of zyxel 630-11, we use the same module speedtch only > > varying vid and pid.. well, some users have conecctions that need OAM loopback > > support.. Since speedtch have no support for this I'd want to know if you are > > planning incorporate this feature.. > > Hi Eduardo, I have no plans concerning OAM loopback because I don't know what > it is! How about you explain what it is, and then we implement it together? > OAM loopback are ATM cells send to verify connectivity at the data level. I don't know too much but there is F4 or F5 types cells More on this good link is http://www.cisco.com/univercd/cc/td/doc/product/atm/c8540/12_1/12_c_e/troubl e/atm_int.htm#1053668 You can look at the unicorn driver where it is done. http://www.bewan.com/bewan/drivers/bast-0.8.7.tgz Search for oam in unicorn_atm/unicorn_atmdrv.c (this file is GPL, so...) There is too a OAM_ping which name is clear of what it does (in tools/oam_ping.c) Gilles Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
