Hi, I see your page. Since I am pretty new to Linux, please give me some more instructions
1. Which packages for your repository do I need? All? 2. Do I need to re-compile the kernel? (I have never done that!) 3. Do I still need the Alcatel/Tho. firmware? Is that from windows XP fine? Thanks a lot mario At 15.46 18/08/2004, you wrote: >Sorry my ADSL connection seems to be out of service. > >I hope it will be available again tomorow morning. > >Fred > >RUAUDEL Frédéric wrote: > > >Try my RPMS : > > > >http://grumz.dyndns.org/ADSL_FC2 > > > >mario wrote: > > > > > > > >>Hello, > >> > >>I have been fighting with speedtouch and linux for the past four days, > >>without success :-( > >>Please, help me! > >> > >>I tried to follow the instruction at > >>http://benoit.papillault.free.fr/speedtouch/user.en.php3 > >> > >> > >>The best I get is: > >> > >>[XXXX root]# pppd call adsl updetach > >>using channel 2 > >>Using interface ppp0 > >>Connect: ppp0 <--> /dev/pts/7 > >>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf0a2f842>] > >>......... > >>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf0a2f842>] > >>LCP: timeout sending Config-Requests > >>---------------------------------------------- > >> > >>There is something wrong, I guess, with my installation/distro, since > >> > >>[XXXX root]# modprobe usbcore > >>FATAL: Module usbcore not found. > >> > >>I am on Fedora Core2, > >>Linux XXXX 2.6.5-1.358smp #1 SMP Sat May 8 09:25:36 EDT 2004 i686 i686 > >>i386 GNU/Linux > >> > >>Also, it seems that dsmeg is alerting me on something, aa it outputs: > >> > >>PPP generic driver version 2.4.2 > >>divert: not allocating divert_blk for non-ethernet device ppp0 > >>HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 > >>N_HDLC line discipline registered. > >>usb 2-1: bulk timeout on ep7out > >>usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 > >>usb 2-1: bulk timeout on ep7out > >>usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 > >>usb 2-1: bulk timeout on ep7out > >>usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 > >>Badness in local_bh_enable at kernel/softirq.c:136 > >>Call Trace: > >>[<02121d8e>] local_bh_enable+0x39/0x5c > >>....................................... > >> > >>divert: no divert_blk to free, ppp0 not ethernet > >>divert: not allocating divert_blk for non-ethernet device ppp0 > >>usb 2-1: bulk timeout on ep7out > >>usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 > >>divert: not allocating divert_blk for non-ethernet device ppp1 > >>............................. > >>Badness in local_bh_enable at kernel/softirq.c:136 > >>Call Trace: > >>[<02121d8e>] local_bh_enable+0x39/0x5c > >>............................... > >> > >>divert: no divert_blk to free, ppp0 not ethernet > >>divert: not allocating divert_blk for non-ethernet device ppp0 > >>PPP Deflate Compression module registered > >> > >>------------------ > >>Also, the alcatel modem seems to be seen, since > >> > >>[EMAIL PROTECTED] root]# cat /proc/bus/usb/devices > >>.......................................... > >> > >>T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > >>D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > >>P: Vendor=06b9 ProdID=4061 Rev= 0.00 > >>S: Manufacturer=ALCATEL > >>S: Product=Speed Touch USB > >>S: SerialNumber=0090D041AB57 > >>C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA > >>I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > >>E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms > >>I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > >>I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > >>E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > >>E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > >>E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > >>I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > >>E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms > >>E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms > >>E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > >>I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > >>E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms > >>E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms > >>E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > >>I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > >>E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms > >>E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms > >> > >>A problem with the driver (i took that one from Windows)? > >>......................................................... > >> > >> > >>Is anybody over there able to give me some good hint? > >>Thanks a lot > >> > >> > >> > >> > >> > >> > >>Liste de diffusion modem ALCATEL SpeedTouch USB > >>Pour se désinscrire : > mailto:[EMAIL PROTECTED] > >> > >> > >> > >> > >> > >> > >> > > > >Liste de diffusion modem ALCATEL SpeedTouch USB > >Pour se désinscrire : > mailto:[EMAIL PROTECTED] > > > > > > > > > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
