hey im getting close to get the modem working. i patched the kernel 2.4.29 with the patch-2.4.30pre2. then i installed benoit drivers but when i try speedtouch-start i get this error:
Starting ADSL connection... using channel 8 Using interface ppp0 Connect: ppp0 <--> /dev/pts/0 pppoe: send (sendPacket): Network is down sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>] pppoe: send (sendPacket): Network is down sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>] pppoe: send (sendPacket): Network is down sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>] LCP: timeout sending Config-Requests Connection terminated. Serial link disconnected. using channel 9 Using interface ppp0 Connect: ppp0 <--> /dev/pts/1 pppoe: send (sendPacket): Network is down sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x11f79b47>] pppoe: Timeout waiting for PADO packets Script pppoe -s -I `pppoa3 -vpi 0 -vci 35 -b` finished (pid 372), status = 0x1 sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x11f79b47>] pppoe: send (sendPacket): Network is down sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x11f79b47>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x11f79b47>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x11f79b47>] pppoe: send (sendPacket): Network is down Terminating on signal 15. sent [LCP TermReq id=0x3 "User request"] sent [LCP TermReq id=0x4 "User request"] Connection terminated. pppoa3: no process killed disconnect script failed Waiting for 1 child processes... script pppoe -s -I `pppoa3 -vpi 0 -vci 35 -b`, pid 388 pppoe: Timeout waiting for PADO packets Script pppoe -s -I `pppoa3 -vpi 0 -vci 35 -b` finished (pid 388), status = 0x1 any idea of what is wrong? On Sat, 5 Mar 2005 20:48:11 +0100 (CET), Henk Jan Priester <[EMAIL PROTECTED]> wrote: > > > > > > There's just a thing i can�t understand. Booting slack 10.1 with > > hotplug on the two lights of the modem stay green. That should mean > > the modem has been detected and its driver has been loaded shouldn it? > > > > The other day i found at #speedtouch @ irc.freenode.net a guy who told > > me he was using slack10.1 + patch for kernel 2.4.29 + benoit drivers. > > Do you know this patch that corrects this modem_run bug? > > In my case modem_run was 'hanging' since 2.4.28, > this looks similiar to your problem. > In my case '/var/log/messages' contained message from modem_run > that the firmware was uploaded but I never got the message > that the ADSL line was up. > > I am using a patch from Kaupo Arulo which modifies the > kernel source: drivers/usb/devio.c > I can mail you the modified file but then you have to > recompile your kernel. > > An alternative is to use 2.4.30pre2 which includes also > a patch for this problem. (but you also have to recompile your kernel) > or switch to the 2.6 kernel. (should work with user drivers as well) > > Henk Jan > > > > > > > > On Sat, 5 Mar 2005 10:40:09 +0100 (CET), Henk Jan Priester > > <[EMAIL PROTECTED]> wrote: > >> > >> > >> On Sat, 5 Mar 2005, Andrew Benton wrote: > >> > >>> Leonardo Ecco wrote: > >>>> So, if anybody using slack10.1 has been successful please mail me and > >>>> explain what you did. > >>> Well you asked for it... > >>> http://www.linux-usb.org/SpeedTouch/slack/index.html > >> > >> This page refers to the user space drivers when running slack 10.1 > >> with the default kernel. > >> I am a slackware user have not installed 10.1 out of the box > >> but upgraded my system every 1-2 weeks with slack-current. > >> > >> I am not using hotplug but the problems I have had are that > >> modem_run is broken when using kernel 2.4.28 and 2.4.29, > >> it is solved again in 2.4.30pre2. > >> > >> Slackware 10.1 comes with a vanilla 2.4.29 kernel so > >> using the user space drivers might be be broken due > >> to the fact that modem_rum does not work correctly. > >> > >> Henk Jan > >> > >>> > >>> Liste de diffusion modem ALCATEL SpeedTouch USB > >>> Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > >>> > >>> > >>> > >> Liste de diffusion modem ALCATEL SpeedTouch USB > >> Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > >> > >> > > Liste de diffusion modem ALCATEL SpeedTouch USB > > Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
