Andrew Benton wrote: >Mert Uzbaşlı wrote: > > >>May 29 12:03:51 SANCTUARY pppd[2695]: connect(8.35): Resource >>temporarily unavailable >>May 29 12:03:51 SANCTUARY kernel: usb 2-1: no stage 1 firmware >>found!<7>drivers/usb/atm/usb_atm.c: udsl_atm_open: firmware not loaded >>(-11)! >> >>I assume there's something wrong with the firmware. Btw; >> >>mert:$ ls /lib/firmware/ >>speedtch-1.bin speedtch-2.bin >> >>In the mailing list archives i found that someone have had this >>"Resource temporarily unavailable" problem and the answer to him was >>"wait more before the pppd call adsl command". >> >> > >No, you were right the first time, Resource temporarily unavailable usually >means the firmware didn't load. Are you sure you used the correct firmware for >your modem? What revision is your modem > mert:$ cat /proc/bus/usb/devices | grep -B 1 ALCATEL P: Vendor=06b9 ProdID=4061 Rev= 0.00 S: Manufacturer=ALCATEL
I use mgmt.o which i've been using for years. As i said i can establish a connection by using modem_run with the same firmware. I'm pretty sure that i'm using the correct firmware :\ -- Binary/unsupported file stripped by Listar -- -- Type: text/x-vcard -- File: mert.vcf Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�nscrire : mailto:[EMAIL PROTECTED]
