Duncan Sands wrote: >Hi Mert, > > > >>/lib/firmware is mounted under /. so i don't think that there's any >>chance it to be unmounted at the moment when the driver tries to load >>the firmware. Also CONFIG_USB_DEBUG is enabled in my kernel. >> >> > >some systems boot from an initrd, and mount / later on. > Oh, I don't use initrd.
> On the other >hand, I doubt hotplug is run before the root filesystem is mounted, so >this is likely not your problem. If CONFIG_USB_DEBUG is enabled, then >you should have more messages than those you showed. It may be that >your logging level is too low. Try doing > echo 8 > /proc/sys/kernel/printk >before plugging in the modem and see if more messages turn up in dmesg. > > I'll try this. >By the way, I'm assuming you see the same problem if you plug the modem >in after the system has booted? > > > Actually my modem is always pluged in. I never think plugging it in after system boots. I'll try it now. Thanks a lot again. >Ciao, > >D. > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > > > > > > -- Binary/unsupported file stripped by Listar -- -- Type: text/x-vcard -- File: mert.vcf Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�nscrire : mailto:[EMAIL PROTECTED]
