Hi, i wrote a mail to my ISP and he telled me that they use chap for authentification. So i moved the pap-secrets aside in my home dir. The chap-secret has now the same content as my pap-secrets but I can't still connetcting. If I switch debug on, i see that it will always authentificate with pap automatecly, but in /etc/ppp/ there is now now pap-file... How can I define that he uses always chap?
Max Dunc wrote: >Max Stricker wrote: > > >>Hi Dunc, >> >>thanks for your answer! >>Thats what i get: >>server ~ # /usr/sbin/pppd call speedtch debug >>Plugin pppoatm.so loaded. >>In pppoatm_process_extra_options >>In options_for_pppoatm >>In pppoatm_check_options >>In pppoatm_connect >>In pppoatm_establish_ppp >>using channel 8 >>Using interface ppp0 >>Connect: ppp0 <--> 8.35 >>In pppoatm_do_send_config >>In pppoatm_recv_config >>sent [LCP ConfReq id=0x1 <magic 0x7d4e692e>] >>rcvd [LCP ConfReq id=0x1 <auth pap> <magic 0xc41281ca>] >>No auth is possible >>sent [LCP ConfRej id=0x1 <auth pap>] >>rcvd [LCP ConfReq id=0x2 <auth pap> <magic 0xc41281ca>] >>No auth is possible >>sent [LCP ConfRej id=0x2 <auth pap>] >>rcvd [LCP ConfReq id=0x3 <auth pap> <magic 0xc41281ca>] >>No auth is possible >>sent [LCP ConfRej id=0x3 <auth pap>] >>rcvd [LCP ConfReq id=0x4 <auth pap> <magic 0xc41281ca>] >>No auth is possible >>sent [LCP ConfRej id=0x4 <auth pap>] >>rcvd [LCP ConfReq id=0x5 <auth pap> <magic 0xc41281ca>] >>No auth is possible >>sent [LCP ConfRej id=0x5 <auth pap>] >>rcvd [LCP ConfReq id=0x6 <auth pap> <magic 0xc41281ca>] >>No auth is possible >>sent [LCP ConfRej id=0x6 <auth pap>] >>Terminating on signal 2. >>sent [LCP TermReq id=0x2 "User request"] >>rcvd [LCP ConfReq id=0x7 <auth pap> <magic 0xc41281ca>] >>rcvd [LCP TermAck id=0x2] >>Connection terminated. >>In pppoatm_disestablish_ppp >>In pppoatm_disconnect >>In pppoatm_cleanup >>In pppoatm_close >>In pppoatm_cleanup >>In pppoatm_close >>server ~ # >> >>So i think that anything is wrong with my /etc/ppp/pap-secrets. >>That's its content: >> >># Secrets for authentication using PAP >># client server secret IP addresses >>"[EMAIL PROTECTED]" * "mysecretpass" >> >>I analyzed the pap-secrets.example, and recognized that its not in the >>same form, >>but I made it like in the how 2. >> >>Any Ideas? >> >>Max >> >> > >Do you definately need PAP and not CHAP? > >Maybe try copying pap-secrets to chap-secrets? You could even move >pap-secrets aside while leaving chap there, in case it is just trying to >use the wrong method. > >What is different about the example file? > >Cheers, > >Dunc > > > >>Dunc wrote: >> >> >> >> >>>Max Stricker wrote: >>> >>> >>> >>> >>> >>>>Helo, >>>>yes my ISP is tele2, and they use PPPoA (1483 RFC Bridged), >>>>on my windows xp it works with PPPoA, but I want format c and use only >>>>linux if >>>>my modem runs on it. >>>> >>>>Max >>>> >>>> >>>> >>>> >>>> >>>Hi Max, >>> >>>Do you get any more info if you switch debugging on? >>> >>>try # pppd call speedtch debug >>> >>>Cheers, >>> >>>Dunc >>> >>> >>> >>> >>> >>> >>>>>Ciao, >>>>> >>>>>are you sure that tele2 (or whatever your isp is) has a PPPoA >>>>>connection? Although I don't know if this is the right question, as we >>>>>can see an *attempt* for a ppp connection. >>>>> >>>>>~marco >>>>> >>>>>Il giorno sab, 28/01/2006 alle 15.03 +0100, Max Stricker ha scritto: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>>Hi, >>>>>>I don't know if im right here, because its my 1. post in a mailing list. >>>>>>I've followed this how to: >>>>>>http://www.linux-usb.org/SpeedTouch/gentoo/index.html >>>>>>to get working my Alcatel Speedtouch 330 Rev.4 modem under >>>>>>Gentoo. >>>>>>I'm a Linux newbee so i can't resolve the error I get without help. >>>>>>I have 2 different errors: >>>>>>server ~ # /usr/sbin/pppd call speedtch >>>>>>Plugin pppoatm.so loaded. >>>>>>Using interface ppp0 >>>>>>Connect: ppp0 <--> 8.35 >>>>>>LCP: timeout sending Config-Requests >>>>>>Connection terminated. >>>>>> >>>>>>and >>>>>>server ~ # /usr/sbin/pppd call speedtch >>>>>>Plugin pppoatm.so loaded. >>>>>>Using interface ppp0 >>>>>>Connect: ppp0 <--> 8.35 >>>>>>Killed >>>>>> >>>>>>dmesg says: >>>>>>speedtch 2-2:1.0: found stage 1 firmware speedtch-1.bin >>>>>>speedtch 2-2:1.0: found stage 2 firmware speedtch-2.bin >>>>>>ATM dev 0: ADSL line is synchronising >>>>>>ATM dev 0: ADSL line is up (4832 kb/s down | 320 kb/s up) >>>>>> >>>>>>can anybody help me resolving this (little??) problem? >>>>>>I don't know how i get an answer on this post... >>>>>>this is my mail-adress : maxstricker [at] tele2 [dot] it >>>>>> >>>>>>greets from Italy and sorry for my very bad english >>>>>>Max >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>-- >>>>>Email.it, the professional e-mail, gratis per te: http://www.email.it/f >>>>> >>>>>Sponsor: >>>>>Per i progetti che rimandi da tempo, Findomestic ti offre la soluzione >>>>>ideale per te, con semplicità e senza anticipi! Clicca e scopri come >>>>>Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=3936&d=28-1 >>>>> >>>>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>>> >>>> >>>> >>>> >>>> >>>> >>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>> >>> >>> >>> >>> >>> >>> >> >>Liste de diffusion modem ALCATEL SpeedTouch USB >>Pour se désinscrire : mailto:[EMAIL PROTECTED] >> >> >> >> > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
