Hmm, I don't have either of those files on my machine - tried a find / -name pppoatm.ko and for usbatm.ko and no results.
My speedtouch wasn't connected at the time I did the install - I don't know if that could make a difference. I also do think the firmware is getting loaded as when the udev service starts the lights on the modem flash, so I think that's fine. I'm just puzzled about this atm support/modules - they seem to be nowhere to be found and I can't work out why. I'm using 2.6.15-1.2054_FC5 which appears to be the same as you have. I tried installing the linux-atm and linux-atm-lib packages but they didn't add any atm modules anywhere. Still rather puzzled. James -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Benton Sent: 22 September 2006 18:40 To: [email protected] Subject: [speedtouch] Re: Speedtouch 330 Rev 4 and Fedorace Core 5 James Beeston wrote: > /proc/net/atm doesn't exist. And I can't find a module for atm in > /lib/modules - I think that's where I looked, and there was a load of > modules in the directory structure under there and a net subdirectory which > I looked in but no atm looking modules. I'm guessing FC5 comes without ATM > support built into the kernel or as a module. Fedora Core 5 comes with ATM support /lib/modules/2.6.15-1.2054_FC5smp/kernel/net/atm/pppoatm.ko /lib/modules/2.6.15-1.2054_FC5smp/kernel/drivers/usb/atm/usbatm.ko Andy Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
