________________________________
From: [EMAIL PROTECTED] on behalf of Gilles Espinasse Sent: Fri 9/7/2007 11:56 PM To: speedtouch@ml.free.fr Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway Selon C A Tomy <[EMAIL PROTECTED]>: > I tried both 'atmarp -s 10.200.1.1 8.35' and 'atmarp -s 10.200.1.1 8.35 null' > . But in either case, piniging my gateway is not sucessful. > > Tommy > Maybe you did not use routed IP. Instead a configuration based on br2684 usage may be needed. Gilles Is it possible to make configuation based on br2684 that uses amarpd. If so how is it done? Some time back, I assumed my connection to be PPPoE and tried to configure my connection. But this is what I got : localhost peers # br2684ctl -b -c 0 -a 8.35 && > sleep 5 br2684ctl[7028]: Interface "nas0" created sucessfully br2684ctl[7028]: Communicating over ATM 0.8.35, encapsulation: LLC br2684ctl[7028]: Interface configured localhost peers # ifconfig nas0 10.200.3.190 netmask 255.255.0.0 && > sleep 10 && localhost peers # route add default gw 10.200.1.1 localhost peers # pppd call speedtch Plugin rp-pppoe.so loaded. RP-PPPoE plugin version 3.3 compiled against pppd 2.4.4 Timeout waiting for PADO packets Unable to complete PPPoE Discovery localhost peers # Tommy Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] -- Binary/unsupported file stripped by Listar -- -- Type: application/ms-tnef -- File: winmail.dat Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
