2011/5/26 H Hartley Sweeten <[email protected]>:
> I think the biggest hurdle with using the amba-pl022 driver is that the ep93xx
> spi peripheral does not have the registers with the pid and cid id's. Without
> those I don't think the amba bus driver will be able to match the device to
> the driver.
This is not a problem. We have this code to dynamically create and
register a device with a specific periphid on ux500. It worked even
before my recent patches to amba's bus.c if you have only
zeroes in these registers:
struct amba_device *
dbx500_add_amba_device(const char *name, resource_size_t base,
int irq, void *pdata, unsigned int periphid)
{
struct amba_device *dev;
int ret;
dev = kzalloc(sizeof *dev, GFP_KERNEL);
if (!dev)
return ERR_PTR(-ENOMEM);
dev->dev.init_name = name;
dev->res.start = base;
dev->res.end = base + SZ_4K - 1;
dev->res.flags = IORESOURCE_MEM;
dev->dma_mask = DMA_BIT_MASK(32);
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dev->irq[0] = irq;
dev->irq[1] = NO_IRQ;
dev->periphid = periphid;
dev->dev.platform_data = pdata;
ret = amba_device_register(dev, &iomem_resource);
if (ret) {
kfree(dev);
return ERR_PTR(ret);
}
return dev;
}
I'd recommend coming up with some clever numbering scheme
with invented vendor ID.
Yours,
Linus Walleij
------------------------------------------------------------------------------
vRanger cuts backup time in half-while increasing security.
With the market-leading solution for virtual backup and recovery,
you get blazing-fast, flexible, and affordable data protection.
Download your free trial now.
http://p.sf.net/sfu/quest-d2dcopy1
_______________________________________________
spi-devel-general mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/spi-devel-general
