[EMAIL PROTECTED] wrote: > > Does anyone know if the brake adjuster is supposed to turn in 90 deg. > increments or the more you turn it, the more it spreads the shoes? > Reason I ask, I am not sure mine are working correctly. Mine only > push the shoes out if turned in 90 deg. notches. Have not had time to > check the other side.
I am afraid it is a little of both. The adjuster turns in 90 degree increments but continues to turn until the shoes are spread out. The reason is because the adjuster is not a cone but a modified cone with 4 distinct sides. So when you turn it 90 degrees it reaches one of the sides and then offers a bit of resistance before going to the next flat side. > Also, > There is a bracket that holds the hand brake cable/spring to at the > back of the hub, sorta shaped like a dime folded into a right angle > with a hole for the spring to connect. Which direction does this > bracket point? Manuals show it aimed toward the wheels but both sides > of mine face the other direction, toward the diff. Same on my parts > car. Facing toward the wheels makes it easier to connect the spring > and looks correct but does not put much tension on the spring. > Any ideas? I haven't had any troubles with pointing the bracket downward and toward the wheel. Joe /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
