List,
Re-assembling the rear-end on my 77 Spit. Can anyone tell me the correct distance from the outside face of the flange to the outside face of the hub once assembled? I am concerned that I installed the hubs too far onto the shafts. That or the flanges are not far enough on-to the shafts. Either way my drums are not fitting correctly. Also, anyone know a good way to torque the flange nuts (124 ft lbs) with the shafts installed?
You can see the flange installed here - not torqued down, but it should only move slightly once it is.
http://www.owatonnacomputerservices.com/images/DSC00675.JPG
Here's the drum position, should be about 1/4 inch further in, right? http://www.owatonnacomputerservices.com/images/DSC00680.JPG
And my overall handy-work (notice the heater, it's -8 F outside!!) http://www.owatonnacomputerservices.com/images/DSC00677.JPG
Thanks List Paul Grafelman
_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
*** http://www.team.net/the-local ***
Your messages not reaching the list? Check out http://www.team.net/posting.html
*** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
