The wings are spot welded at the joint to the rear deck on top and rear valance on the rear. They are also welded (or Braxed) onto the B Post.
If the fenders are otherwise in good condition, you might consider just cutting off those flares and splicing in the openings from the used fenders. That would save the trouble of removing the rear capper and replacing that. There is a crimping tool available at most body supply stores that offsets metal on splice panels so that it ends up being a flush joint rather than a lap joint. Joe 333 AZ ----- Original Message ----- From: "Todd Bermudez" <[EMAIL PROTECTED]> To: "NASS Spitfire" <[EMAIL PROTECTED]>; "Spitfire List" <[email protected]> Sent: Wednesday, February 08, 2006 8:47 AM Subject: Rear Wing Replacement > Hi all, > > OK, so I get this 1967 MKI GT6 for the wife. I've > been sourcing bits from various places....somewhat > successfully. > > I believe we're gonna need to replace the rear wings. > The lips (over the wheels) were rolled out in an > effort to flare them to cover the wider wheels. The > wings are solid, but the edges don't look very good. > I think I've sourced a pair of used rear fenders. > They're still attached to a car. I'm looking for info > on cutting them off...where are they welded? The car > they're coming off of will probably be scrapped so > getting them off that car doesn't have to be exact, > but I'll need specific instruction on cutting them off > our car. > > Then reinstallation...are there tricks/tips that > someone can pass along that's done it? > > Cheers, > > Todd Bermudez > 1967 GT6 MKI > Cincinnati, OH Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
