In the madness several years ago that was my Lucas ignition module failing, I changed out the coil. I don't know if it's a 6v or 12v coil. It was picked up at a local auto parts store. On a '79 spit, don't they use 6 volt coils?
I'll take off my current coil and see if there's anything. I might have the label on it upside-down. -- http://infaux.net -------------- Original message ---------------------- From: [EMAIL PROTECTED] > > > The coils should be stamped with the information on it someplace if there > isn't a label. Beyond that, there isn't really a way to tell which > voltage a coil is set for. All of our Spits are 12 volt DC, but some > early models (MK I and MK II were positive ground instead of negative). > > Do you suspect you have the wrong coil in the car now? Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
