Thanks Jeff 

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jeff
Hewitt
Sent: Friday, March 30, 2007 11:49 AM
To: [email protected]
Subject: Re: ESFR sprinklers and moving a single branch line

Dewayne,

Yes, you are interpreting correctly.  One or the other, but not both.



Jeff Hewitt, PE, SET, SFPE (Prof. Member) Corporate Engineer Bi-State
Fire Protection Corporation
636-946-0011
636-946-5172 (FAX)

This e-mail and any attachments are CONFIDENTIAL and may be protected by
one or more legal privileges.  It is intended solely for the use of the
addressee identified above.  If you are not the intended recipient, any
use, disclosure, copying or distribution of this e-mail is unauthorized.
If you received this e-mail in error, please notify the sender
immediately at the above captioned address.

----- Original Message -----
From: "Dewayne Martinez" <[EMAIL PROTECTED]>
To: "SprinklerFORUM" <[email protected]>
Sent: Friday, March 30, 2007 11:41 AM
Subject: ESFR sprinklers and moving a single branch line


NFPA 13 (07ed)
Sections
8.12.2.2.4 (3)
8.12.3.1 (4c)

Am I interpreting these two sections correct to mean that if you have
already moved sprinklers along a branch line and have exceeded the
maximum allowable spacing then you are not allowed to move the branch
line itself.

Thanks,
Dewayne
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to