In order to get a flow test done for a project, the local water utility will perform the flow test but we need to be present to "record the numbers". Being that I have never had to do this, I wanted to ask the group for their thoughts and recommendations of what is considered "standard operating procedure".
I have already printed out a copy of AFSA's "Flow Test Information Sheet". I can pretty much figure out where to put most of the "info" but would appreciate any pointers, methods, etc that others use. What should I be looking for, what should I be asking for, etc. One item that I was told a while back when requesting a flow test was to ask for the system to be tested both directions, ie, read static on hydrant 1, residual on hyd 2 and then switch everything around to then be able to static hyd 2, residual hyd 1. Guess my question is.. is that necessary or just overkill and a waste of time? Appreciate any pointers. Richard _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
