>From the Blazemaster site:

http://www.blazemaster.com/designSpecification/dodont.asp

"Do not use both TeflonR tape and thread sealants simultaneously."

Jim K. 




-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Roland
Huggins
Sent: Friday, December 07, 2007 2:40 PM
To: [email protected]
Subject: Re: Tape and/or Dope

Unfortunately you can make such a literal interpretation and ignore  
the intent is to put something on the male threads.  That is except  
for areas where the mfg has imposed a best practice.  Didn't  
BlazeMaster say NOT to use both on the sprinkler inserts??

Roland

On Dec 7, 2007, at 8:36 AM, Gary Stites wrote:

> Here's one for you....
>
> In Los Angeles on a high-rise building, we had a field inspector cite
> NFPA 13, 6-5.1.3 (2002) as meaning we could use tape OR compound on  
> pipe
> NOT both.  Does anyone out there believe this is the intent of the  
> code?
> Or do you think the point of this passage is to NOT put these items on
> the female threads?
>
> Gary Stites
> Operations Manager: Southern California
> RLH Fire Protection
> 3430 Unicorn Road
> Bakersfield, Ca. 93308
> 661-322-9344 #1343
> Direct Line 661-410-1343
> Direct FAX 866-871-2237
> [EMAIL PROTECTED]
> www.rlhfp.com
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>
> To Unsubscribe, send an email to:Sprinklerforum- 
> [EMAIL PROTECTED]
> (Put the word unsubscribe in the subject field)
>

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)



_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to