It was a requirement in the 1985 13 section 7-1.2 Garth ----- Original Message ----- From: "Todd Williams - FPDC" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, June 10, 2008 8:53 AM Subject: Re: Hydraulic Data Plate
> The oldest version of NFPA 13 I have is 1989. That requirement was > included (7-1.2) and was not indicated as a change. I run into > "missing name plate syndrome" a lot and there is not much you can do > reliably other than trace the pipe and re-calc, if plans aren't available. > > > At 08:29 AM 6/10/2008, you wrote: > >Hello sprinklerforum, > > > > When did it the requirement for a hydraulic data plate to be posted > > become a part of NFPA 13? > > > > I have a customer that just went through an insurance inspection... They > > wrote them up for not having the data plates posted. This is a 10 story > > building and the floors are fed from the standpipe on each floor. The > > company that installed the system back in 85 is not to be found anymore. > > The HOA does not want to tear up the units so we can trace the pipe to > > reproduce the calcs (or pay what I would charge for that). I'm open to > > suggestions. I do have a call in to the AHJ about plans but he does not > > think they exist any more. > > > >-- > >Best regards, > > Charles Thurston mailto:[EMAIL PROTECTED] > > Coastal Fire Protection > > > >_______________________________________________ > >Sprinklerforum mailing list > >[email protected] > >http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > > >To Unsubscribe, send an email to:[EMAIL PROTECTED] > >(Put the word unsubscribe in the subject field) > > Todd G. Williams, PE > Fire Protection Design/Consulting > Stonington, Connecticut > www.fpdc.com > 860.535.2080 > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
