Anybody ever have a problem going with this dramatic a reduction?

At 02:17 PM 5/26/2009, you wrote:
>Todd,
>
>Can you use a Victaulic #51 6" x 2 1/2" groove eccentric and connect to
>flanges using vic flanges?
>
>Jim Johnston, P.E.
>Fire Protection Engineer
>Inland Fire Protection, Inc
>1100 Ahtanum Road
>Yakima, WA 98903
>Phone 509-248-4471
>Fax 509-248-1180
>[email protected]
>
>
>-----Original Message-----
>From: Todd Williams [mailto:[email protected]]
>Sent: Tuesday, May 26, 2009 10:55 AM
>To: [email protected]
>Subject: reducing suction line
>
>I have a situation where a 6" main from a tank is going to need to be
>connected to a 2-1/2" suction flange on a pump. The largest eccentric
>reducer I can get is 4 x 2-1/2. Can I back-to-back reducers without
>causing problems? Could I used a 6x4 90 on the suction line and then
>elbow back to the pump (with at least the minimum distance reqd)? Any
>other thoughts?
>
>Todd G. Williams, PE
>Fire Protection Design/Consulting
>Stonington, Connecticut
>www.fpdc.com
>860.535.2080
>_______________________________________________
>Sprinklerforum mailing list
>http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>For Technical Assistance, send an email to: [email protected]
>
>To Unsubscribe, send an email to:[email protected]
>(Put the word unsubscribe in the subject field)
>
>_______________________________________________
>Sprinklerforum mailing list
>http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>For Technical Assistance, send an email to: [email protected]
>
>To Unsubscribe, send an email to:[email protected]
>(Put the word unsubscribe in the subject field)

Todd G. Williams, PE
Fire Protection Design/Consulting
Stonington, Connecticut
www.fpdc.com
860.535.2080  
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to