The elevator supplier can probably give clearances between the bottom of the car and the pit. As far as eliminating heads, etc, the local elevator code may be the best source of answers
At 06:58 PM 9/11/2009, you wrote: >Next question; 13D allows for the elimination of the sprinkler in the >elevator equipment room, though I'm including one on this project since the >room is designated as equipment/storage. I'm assuming that I will need a >sprinkler at the top and bottom of the elevator shaft since it is >constructed of wood. The trouble that I foresee here is that there is only >18" between the finished floor and the bottom of the elevator pit. Will >this give me enough room to install a sprinkler? If there is a smoke at the >top of the shaft can I eliminate that sprinkler? Or, should I eliminate the >pit sprinkler and keep the upper sprinkler? Or, is there another solution >that someone else has used? > >Thanks again, > >Bob Knight, CET >1660 Hill Rd >Melba, Idaho 83641 >(208) 318-3057 >(208) 495-2057 fax >[email protected] >www.firebyknight.com > >-------------- next part -------------- > >No virus found in this outgoing message. >Checked by AVG - www.avg.com >Version: 8.5.409 / Virus Database: 270.13.91/2363 - Release Date: >09/11/09 09:15:00 >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
