If there is no specific requirement, the whole paragraph becomes irrelevant.
Craig L. Prahl, CET Fire Protection Specialist Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [email protected] http://www.ch2m.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Denhardt Sent: Wednesday, March 31, 2010 1:55 PM To: [email protected] Subject: RE: Underground flushing velocities I agree with Roland. Not less than one of the following. It does not state pick the highest. You can use ANY one of the procedures. John John August Denhardt, P.E. Strickland Fire Protection Incorporated 5113 Berwyn Road College Park, Maryland 20740 Office Telephone Number: 301-474-1136 Mobile Telephone Number: 301-343-1457 FIRE SPRINKLERS SAVE LIVES -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ed Kramer Sent: Wednesday, March 31, 2010 2:09 PM To: [email protected] Subject: RE: Underground flushing velocities With all due respect, I don't see the word 'any' anywhere in 10.10.2.1.3. I'm looking at the 2010 version, maybe older versions contain the word 'any'. Ed Kramer Littleton, CO > -----Original Message----- > From: [email protected] [mailto:sprinklerforum- > [email protected]] On Behalf Of Law, Kevin W > Sent: Wednesday, March 31, 2010 11:38 AM > To: [email protected] > Subject: RE: Underground flushing velocities > > The key is the requirement states it shall not be less than ANY one of > the following. > > Therefore, the very minimum flow rate will be 10ft/sec line velocity. > > If your system cannot under any condition flow a minumum of 10ft/sec > then you would have to get a ruling from the AHJ to allow that. > > Nuff said > > > Kevin Law, PE > Bechtel National, Inc. > Waste Treatment Project > Fire Protection Engineering > Work (509) 371-3280 > Cell (509) 531-5715 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
