The reason #3 is so popular is that it is so simple to apply in the field. Step#1: Open supply valve to riser. (Always direct water flow to a safe location.) Step#2: Allow full flow until water runs clear or for at least 2 minutes. Step#3: Close supply valve and cap riser, you're done flushing.
No gauges! No Pito! No Calculation's! Anybody can do it! Thom McMahon, SET Firetech, Inc. 2560 Copper Ridge Dr P.O. Box 882136 Steamboat Springs, CO 80488 Tel: 970-879-7952 Fax: 970-879-7926 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
