If there are no openings then there is nothing to protect. The Shaft is 
protected from above.
Greg

On 7/15/2010 4:31 AM, tom poisal wrote:
> I would run it by the AHJ, personally if it's a straight shot down to the
> garbage room, I don't see a need for any other sprinkler heads, however
> there is a chance that debris could get hung up on the shaft itself
> depending on the interior construction, if smooth then no spkrs if sheet
> metal protrudes then every other level, and they'd have to fab a cover so
> trash doesn't get hung up on the sprinkler head.
>
> On Wed, Jul 14, 2010 at 9:47 PM, Levis Blanchet<[email protected]>wrote:
>
>    
>>
>>
>> I am looking for your opinion on a garbage chute sprinkler lprotection. We
>> have to protect a building 22 stories high. The top floors are condos from
>> the 10th to the 22nd floor. The garbage chute is used for these floors only.
>> One sprinkler head will be located every two floors inside the service
>> opening. The rest of the garbage chute from the 9th floor to the ground
>> floor is located inside a fire rated shaft without any access to these
>> floors.A sprinkler head is located at the bottom of the garbage at the
>> ground floor. My question is the following; Do we need to sprinkler the
>> levels below the 9th floor without any access doors.
>>
>> Lévis Blanchet
>> Viking Fire Protection inc.
>> 3550 Pitfield, St-Laurent, Qc
>> _______________________________________________
>> Sprinklerforum mailing list
>> [email protected]
>> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>>
>> For Technical Assistance, send an email to: [email protected]
>>
>> To Unsubscribe, send an email 
>> to:[email protected]<to%[email protected]>
>> (Put the word unsubscribe in the subject field)
>>
>>      
>
>
>    

-- 
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to