You may want to include the manufacture they are the ones who warranties the 
heads.

 Thanks,
John Lewis





________________________________
From: Craig Leadbetter <[email protected]>
To: [email protected]
Sent: Thu, January 17, 2013 11:20:36 AM
Subject: Re: Replacing heads after a fire

This sound like a good question to be answered not only by the AHJ, but the
owner and their insurance carrier since it is their money that is on the
line.

-- 
Craig Leadbetter
Safeguard of Marquette
PO Box 116
Marquette, MI 49855

(O) 906-475-9955
(F) 906-475-5474
(C) 906-362-5393

[email protected]



On Thu, Jan 17, 2013 at 2:13 PM, Bill Brooks <[email protected]>wrote:

> But here's a follow-up question - who is the appropriate individual to make
> this determination? In my opinion this is not the sprinkler contractor.
> Please read the word "not" as if I had capitalized it.
>
> Just my opinion.
>
> Bill Brooks
>
> William N. Brooks, P.E.
> Brooks Fire Protection Engineering Inc.
> 372 Wilett Drive
> Severna Park, MD 21146-1904
> 410-544-3620
> 410-544-3032 FAX
> 412-400-6528 Cell
>
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Cahill,
> Christopher
> Sent: Thursday, January 17, 2013 1:11 PM
> To: [email protected]
> Subject: RE: Replacing heads after a fire
>
> 2 is all required in your example, well if you want to return to service.
>
> The heat cooling cycle of the glass bulbs are repeated cycles to very near
> operating temperature as I understand it.  One more cycle if it takes 100's
> or more cycles won't make a difference.  The first 99 are the problem.
>
> On the creep of solder its sustained temperatures near operation as I
> understand it.  This is a problem not a single fire.
>
> On the acid - well smoke comes in all flavors.  I'm certainly no chemist
> but
> with that logic why are we not replacing the structural components or the
> plumbing etc.?  Weren't they also damaged by the acid smoke?  I think where
> acid is an issue is in sensitive electronics.  Think of the difference in
> surface area.   And I don't understand the burn/smoke radius part.  The
> burn
> radius of a sprinkler controlled fire is on the order of 1 to ten's of
> feet.
> The smoke is often the entire building.  Not sure you need to go next door
> and replace sprinkler head to get 2 rings past, lol.
>
> What I typically see is out of an abundance of caution replace the fused
> heads and the first ring around.  But I don't think it has any technical
> merit. Once the fitter is there a couple more heads is cheap to make
> everyone feel good.  In the end I wouldn't balk if you replace the 2 and if
> someone pays you for more, good for you.
>
> Good discussion item.  Often we don't get truly new things to banter about
> on this forum.
>
> Chris Cahill, PE*
> Senior Fire Protection Engineer, Aviation & Facilities Group Burns &
> McDonnell
> 8201 Norman Center Drive
> Bloomington, MN 55437
> Phone:  952.656.3652
> Fax:  952.229.2923
> [email protected]
> www.burnsmcd.com
>
> Proud to be one of FORTUNE's 100 Best Companies to Work For *Registered in:
> MN
>
>
>
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Ben Young
> Sent: Thursday, January 17, 2013 11:41 AM
> To: [email protected]
> Subject: Replacing heads after a fire
>
> This was a hypothetical question asked by one of our inspectors the other
> day, and I did not know the answer.  Thought I would see if anyone else
> here
> might know where this is written in black and white.
>
> Say you have a large room with 20+ heads, or an open warehouse area.  The
> building is fully sprinkled, and everything else is normal / SOP.
>
> They have a fire in this room/area, and lets say, two heads activate and
> control the fire.
>
> The question is, how many of the heads do you have to replace?  Is there a
> code requirements for this that exists?  I found some anecdotal evidence
> from someone in the industry with more experience than I, but the only
> thing
> close I could find in the codes was the NFPA 25 stuff relating to loading
> on
> sprinkler heads.
>
> I looked at NFPA's list of codes online, and saw some that may have some
> information on this (NFPA 902 and 904) but they were withdrawn in 2001, and
> I cannot view them online.
>
> Obviously from a liability standpoint, you would want to replace as many of
> the heads as possible, if not all of them, but what if you had a 500K SQFT
> warehouse that was all open, would you want to replace all of them?
>
> Here's the information that I got from my friend who's been around a while.
> -If they're link heads, you want to probably replace all the heads, since
> the acids in the smoke will impact the solder -Look at the burn/smoke
> radius
> from the fire, and replace the heads around this area for the next two
> rings
> of sprinkler heads.
>
> He couldn't tell me where this came from, it was just the way it was always
> done.
>
> Is there a hard and fast rule for this?  Is it an insurance carrier or head
> manufacturer judgement call?  Would rapid heating and cooling cause glass
> bulbs to weaken or micro-fracture down the road?
>
>
> Thanks,
>
>
> Benjamin Young
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <
> http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachment
> s/20130117/93248633/attachment.html>
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20130117/f741fe5c/attachment.html>

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20130117/d780dcca/attachment.html>
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

Reply via email to