You would have to get creative on the thrust block, unistrut, 90 the end of line to get a hanger to keep the line from pushing apart, if you already had armovers or a line that jogged you should be ok.
Richard Carr, SET Branch Manager Cox Fire Protection, Inc 6555 Grace Lane. Jacksonville, Fl. 32205 rc...@coxfire.com 904-781-8227 -----Original Message----- From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Tony Eggster Sent: Friday, March 18, 2016 2:47 PM To: sprinklerforum@lists.firesprinkler.org Subject: Re: cpvc sharkbite style fittings? I found their spec sheet - thanks. Those will work for the 1" but unfortunately I need something in 1 1/4" as well. I see they require a thrust block - any idea what that would consist of? On Fri, Mar 18, 2016 at 11:37 AM, Richard Carr <rc...@coxfire.com> wrote: > Spears makes it, I have a cut sheet if you need it. > > Richard Carr, SET > Branch Manager > Cox Fire Protection, Inc > 6555 Grace Lane. > Jacksonville, Fl. 32205 > rc...@coxfire.com > 904-781-8227 > > > -----Original Message----- > From: Sprinklerforum [mailto: > sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Richard > Carr > Sent: Friday, March 18, 2016 2:35 PM > To: sprinklerforum@lists.firesprinkler.org > Subject: RE: cpvc sharkbite style fittings? > > FlameGuard GripLoc coupling but only in 3/4 and 1". It is a repair > coupling, no glue needed. > > Richard Carr, SET > Branch Manager > Cox Fire Protection, Inc > 6555 Grace Lane. > Jacksonville, Fl. 32205 > rc...@coxfire.com > 904-781-8227 > > > -----Original Message----- > From: Sprinklerforum [mailto: > sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Tony > Eggster > Sent: Friday, March 18, 2016 2:32 PM > To: sprinklerforum@lists.firesprinkler.org > Subject: cpvc sharkbite style fittings? > > Hello all, > > I had someone tell me there are shark-bite style fittings out there > that are listed for fire sprinkler use. I've been searching but have > failed to find any. We have a need for fittings that can be utilized > immediately without having to wait for glue to cure. > > Any direction is appreciated. > > Thanks, > Tony > _______________________________________________ > Sprinklerforum mailing list > Sprinklerforum@lists.firesprinkler.org > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl > er.org _______________________________________________ > Sprinklerforum mailing list > Sprinklerforum@lists.firesprinkler.org > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl > er.org _______________________________________________ > Sprinklerforum mailing list > Sprinklerforum@lists.firesprinkler.org > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl > er.org > _______________________________________________ Sprinklerforum mailing list Sprinklerforum@lists.firesprinkler.org http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list Sprinklerforum@lists.firesprinkler.org http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
