I haven't for a long time and have no intention of starting. I'm just a little 
surprised that this is not universally addressed, given the severity and 
publicity.
   
 
 Todd G Williams, PE 
Fire Protection Design/Consulting
 
Stonington, CT
 
860-535-2080 (ofc)
 
860-553-3553 (fax)
 
860-608-4559 (cell)
 
 
 
 
 

 
 
>  
> On Mar 6, 2017 at 2:23 PM,  <Mark Phillips 
> (mailto:[email protected])>  wrote:
>  
>  
>        
>  
>
>  Totally agree to not touch it with a ten foot pole.
>
>  
>
>    
>
>  
>  
>  
>
>  From:    Sprinklerforum 
> [mailto:[email protected]]  On Behalf Of  Travis 
> Mack, SET
>   Sent:  Monday, March 06, 2017 2:13 PM
>   To:  [email protected]
>   Subject:  Re: Code requirements for antifreeze.
>
>  
>  
>  
>
>  
>
>  
>
> I have seen a few that do.    There are still some in the SW states where we 
> have freezing conditions that allow the use of AF solutions. However, I 
> always turn down projects where the customer asks me to design an AF system.  
>   Basically, the AHJ has little to no liability, as I understand it, should 
> something bad happen.    Because of that, I will either do it as a dry 
> system, or will not touch the project.
>
>  
>  Travis Mack, SET 
>  
>  MFP Design, LLC 
>  
>  2508 E Lodgepole Drive 
>  
>  Gilbert, AZ 85298 
>  
>  480-505-9271 
>  
>  fax: 866-430-6107 
>  
>   email:[email protected] (mailto:email:[email protected])  
>  
>  
>  
>   http://www.mfpdesign.com  
>  
>   https://www.facebook.com/pages/MFP-Design-LLC/92218417692  
>  
>  Send large files to us via:  https://www.hightail.com/u/MFPDesign  
>  
>  LinkedIn:  https://www.linkedin.com/in/travismack  
>  
>  
>
> On 3/6/2017 12:10 PM,  [email protected] (mailto:[email protected])  
> wrote:
>
>  
>  
> >  
> >  
> >  
> >
> > The State of Connecticut adopted a new fire safety code last October. The 
> > use the 2010 edition of NFPA 13. A question came up from a client regarding 
> > antifreeze. After researching and email discussions with the State Fire 
> > Marshal's Office, I found out that CT still allows antifreeze systems to be 
> > installed based on the old requirements. Most jurisdictions that I am aware 
> > of have either adopted 2013 or 2016, or have amended their Codes to prevent 
> > new antifreeze system until a listed solution arrives. How many other 
> > jurisdictions still allow these systems based on the old requirements?
> >
> >  
> >  
> >
> >
> >  Todd G Williams, PE
> >
> >  
> >  
> >
> > Fire Protection Design/Consulting
> >
> >  
> >  
> >  
> >
> > Stonington, CT
> >
> >  
> >  
> >  
> >
> > 860-535-2080 (ofc)
> >
> >  
> >  
> >  
> >
> > 860-553-3553 (fax)
> >
> >  
> >  
> >  
> >
> > 860-608-4559 (cell)
> >
> >  
> >  
> >  
> >  
> >  
> >
> >
> >  
> >  
> >
> >
> >  
> >  _______________________________________________ 
> >  
> >  Sprinklerforum mailing list 
> >  
> >   [email protected] 
> > (mailto:[email protected])  
> >  
> >   
> > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
> >   
>
>  
>
>  
>
>  
>  _______________________________________________ Sprinklerforum mailing list 
> [email protected] 
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
>  
 
 
 
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to