Thermal expansion? I believe there is something in the annex
Mark Phillips Vice President of Fire Protection, Kirlin Carolinas, LLC t: 919-526-1584 | m: 919-610-0490 [email protected] | https://kirlingroup.com Raleigh, NC 27617 From: Sprinklerforum <[email protected]> On Behalf Of Brian Harris Sent: Wednesday, April 11, 2018 5:01 PM To: [email protected] Subject: RE: Expansion Joint Travis- We're on the same page. So what about expansions joints on a non-seismic job? Brian Harris, CET BVS Systems Inc. bvssytemsinc.com<http://bvssystemsinc.com/> From: Sprinklerforum [mailto:[email protected]] On Behalf Of MFP Design, LLC Sent: Wednesday, April 11, 2018 5:00 PM To: [email protected]<mailto:[email protected]> Subject: RE: Expansion Joint Yes. If you are in 9.3, you are doing seismic bracing. If you are Seismic Design Cat A or B, typically you are not going to do seismic and 9.3 with it's sub chapters would not apply. [MFP_logo_F] Travis Mack, SET MFP Design, LLC 3356 E Vallejo Ct Gilbert, AZ 85298 480-505-9271 fax: 866-430-6107 email:[email protected]<mailto:email:[email protected]> http://www.mfpdesign.com<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.mfpdesign.com%2F&data=02%7C01%7C%7C1121d49f9e6b4cf248f108d4df580e77%7C14e5497c16da42e69ffa77d19bafe511%7C0%7C0%7C636379016677342180&sdata=HJ8OA4xyeHAoxXNz5mu%2FYfycgtd5nsFrrpvzulZiNkQ%3D&reserved=0> https://www.facebook.com/pages/MFP-Design-LLC/92218417692<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.facebook.com%2Fpages%2FMFP-Design-LLC%2F92218417692&data=02%7C01%7C%7C1121d49f9e6b4cf248f108d4df580e77%7C14e5497c16da42e69ffa77d19bafe511%7C0%7C0%7C636379016677342180&sdata=H%2BwdcgK8DLGBcNoqJEvUrzsXngySwkX56Vgf9gM9EGk%3D&reserved=0> Send large files to us via: https://www.hightail.com/u/MFPDesign<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.hightail.com%2Fu%2FMFPDesign&data=02%7C01%7C%7C1121d49f9e6b4cf248f108d4df580e77%7C14e5497c16da42e69ffa77d19bafe511%7C0%7C0%7C636379016677342180&sdata=eGdMZGu2wXhUupGwgGTrqF3b54OP5%2BAZvlHhABSexWY%3D&reserved=0> LinkedIn: https://www.linkedin.com/in/travismack<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.linkedin.com%2Fin%2Ftravismack&data=02%7C01%7C%7C1121d49f9e6b4cf248f108d4df580e77%7C14e5497c16da42e69ffa77d19bafe511%7C0%7C0%7C636379016677342180&sdata=tT5E7LsZjSmyreKi4gDCa70EWN%2BZodi%2FhbeCbHNRijI%3D&reserved=0> "The bitterness of poor quality remains long after the sweetness of low price is forgotten." From: Sprinklerforum <[email protected]<mailto:[email protected]>> On Behalf Of Brian Harris Sent: Wednesday, April 11, 2018 1:58 PM To: [email protected]<mailto:[email protected]> Subject: RE: Expansion Joint I saw that but isn't that only for systems with seismic bracing? Brian Harris, CET BVS Systems Inc. bvssytemsinc.com<http://bvssystemsinc.com/> From: Sprinklerforum [mailto:[email protected]] On Behalf Of Gus Olson Sent: Wednesday, April 11, 2018 4:55 PM To: [email protected]<mailto:[email protected]> Subject: RE: Expansion Joint 9.3.2.3.1 (4) NFPA-2013 From: Sprinklerforum [mailto:[email protected]] On Behalf Of Brian Harris Sent: Wednesday, April 11, 2018 4:47 PM To: [email protected]<mailto:[email protected]> Subject: Expansion Joint Trying to find something in NFPA-13 that addresses expansion joints, not a seismic separation, but come up empty. Any help? Brian Harris, CET BVS Systems Inc. Design Manager bvssystemsinc.com<http://bvssystemsinc.com/> Phone: 704.896.9989 Fax: 704.896.1935
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
