I am using AutoCad 2019 – SprinkCAD – ThinkPad p72 with the following build out: ● Intel® Xeon® E-2176M 6 core processor with vPro™ (2.70GHz, up to 4.40GHz with Turbo Boost Technology, 12MB Cache) ● Windows 10 Pro for Workstations 64 ● Windows 10 Pro for Workstations 64 English ● 17.3” UHD 4K (3840 x 2160) IPS anti-glare, 400nits ● 32GB (16GB + 16GB) DDR4 2400MHz ECC ● NVIDIA Quadro P4200 8GB ● IR & 720p HD Camera with Microphone ● Backlit Keyboard with Number Pad - English ● Fingerprint Reader ● Fingerprint ● Hardware dTPM ● Hardware dTPM2.0 Enabled ● 1TB Solid State Drive PCIe-NVMe OPAL2.0 M.2 ● 1TB Hard Disk Drive, 7200rpm, SATA3, 2.5" ● 2TB ● Smart Card Reader ● 6 cell Li-Polymer 99Wh ● 230W AC Adapter (3pin) - US ● Intel® 9560 vPro 802.11AC (2 x 2) & Bluetooth 5.0 ● vPro Certified ● 17.3" UHD (3840 x 2160) LED, IPS, Anti-glare, non-Touch, with IR-Camera, with Mic, with WLAN ● Intel Xeon E-2176M Processor (12MB Cache, up to 4.40 GHz), NVIDIA Quadro P4200 8GB GDRR5
Mike Stossel SET [400dpiLogoCropped] 36 Barren Road East Stroudsburg, PA 18302 Office: 973-670-2627 [email protected]<mailto:[email protected]> From: Sprinklerforum <[email protected]> On Behalf Of firstin--- via Sprinklerforum Sent: Friday, November 8, 2019 8:07 AM To: [email protected] Cc: [email protected] Subject: 13D CAD and Calc Program Hello all, I've been drawing 13D systems by hand on reflective ceiling plans for years. I'm now looking for recommendations for a CAD program for 13D systems, something simple and inexpensive if possible. I've been using Hydronics to run the calculations. There is a problem with this program when trying to plug in a pump. I would like to know who is using what as far a as calculation program. Any recommendations on computer drawing and calculation programs. Thanks all! Owen Evans Sent from my iPhone
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
