We have used progecad – it does work and is cheap, but it can be frustrating. AutoCAD costs a couple thousand dollars more, but if you are planning to use it more than once in a while, progecad can get frustrating and time consuming.
Matt From: Sprinklerforum <[email protected]> On Behalf Of Travis Mack via Sprinklerforum Sent: Friday, November 08, 2019 7:52 AM To: [email protected] Cc: Travis Mack <[email protected]>; Mike Stossel <[email protected]> Subject: Re: 13D CAD and Calc Program Cheap - progecad and excel spreadsheet. Travis Mack, CFPS, CWBSP, RME-G, SET 480-505-9271 MFP Design, LLC www.mfpdesign,com<http://www.mfpdesign,com> Send large files to MFP Design via: https://www.hightail.com/u/MFPDesign<https://linkprotect.cudasvc.com/url?a=https%3a%2f%2fwww.hightail.com%2fu%2fMFPDesign&c=E,1,Hz-j-YzB02WmGjqjjcQnaNusLiHCND1LUobTbeSdSjA_xjtmtb34XR0-lVdNZjk_3o-CToJQ_tseqOwi7SrM7gNTX-vIbnTQajeXod-ct_pn-Q39_g,,&typo=1> Sent from my iPhone On Nov 8, 2019, at 6:31 AM, Mike Stossel via Sprinklerforum <[email protected]<mailto:[email protected]>> wrote: I am using AutoCad 2019 – SprinkCAD – ThinkPad p72 with the following build out: ● Intel® Xeon® E-2176M 6 core processor with vPro™ (2.70GHz, up to 4.40GHz with Turbo Boost Technology, 12MB Cache) ● Windows 10 Pro for Workstations 64 ● Windows 10 Pro for Workstations 64 English ● 17.3” UHD 4K (3840 x 2160) IPS anti-glare, 400nits ● 32GB (16GB + 16GB) DDR4 2400MHz ECC ● NVIDIA Quadro P4200 8GB ● IR & 720p HD Camera with Microphone ● Backlit Keyboard with Number Pad - English ● Fingerprint Reader ● Fingerprint ● Hardware dTPM ● Hardware dTPM2.0 Enabled ● 1TB Solid State Drive PCIe-NVMe OPAL2.0 M.2 ● 1TB Hard Disk Drive, 7200rpm, SATA3, 2.5" ● 2TB ● Smart Card Reader ● 6 cell Li-Polymer 99Wh ● 230W AC Adapter (3pin) - US ● Intel® 9560 vPro 802.11AC (2 x 2) & Bluetooth 5.0 ● vPro Certified ● 17.3" UHD (3840 x 2160) LED, IPS, Anti-glare, non-Touch, with IR-Camera, with Mic, with WLAN ● Intel Xeon E-2176M Processor (12MB Cache, up to 4.40 GHz), NVIDIA Quadro P4200 8GB GDRR5 Mike Stossel SET <image001.png> 36 Barren Road East Stroudsburg, PA 18302 Office: 973-670-2627 [email protected]<mailto:[email protected]> From: Sprinklerforum <[email protected]<mailto:[email protected]>> On Behalf Of firstin--- via Sprinklerforum Sent: Friday, November 8, 2019 8:07 AM To: [email protected]<mailto:[email protected]> Cc: [email protected]<mailto:[email protected]> Subject: 13D CAD and Calc Program Hello all, I've been drawing 13D systems by hand on reflective ceiling plans for years. I'm now looking for recommendations for a CAD program for 13D systems, something simple and inexpensive if possible. I've been using Hydronics to run the calculations. There is a problem with this program when trying to plug in a pump. I would like to know who is using what as far a as calculation program. Any recommendations on computer drawing and calculation programs. Thanks all! Owen Evans Sent from my iPhone _______________________________________________ Sprinklerforum mailing list [email protected]<mailto:[email protected]> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org<https://linkprotect.cudasvc.com/url?a=http%3a%2f%2flists.firesprinkler.org%2flistinfo.cgi%2fsprinklerforum-firesprinkler.org&c=E,1,_WrPLVL_IV_79_2-qkiA4gzPLewfIW7xgnngWv7KNa7GTfhsnkGl_eHH-Q3XDCfAJdFZJvOURR7BTQQfn5f9UxHDa4IdqHEnNOFIl1Bx&typo=1>
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
