Mycenius wrote: 
> Just FWIW oddly enough I am having this issue myself with my new
> HS-453DX NAS running QLMS - it sometimes won't pick up new music copied
> locally to the NAS, but it then appears 1 or 2 days later (I run a
> scheduled scan for new & changed 4am every morning). I'm trying to
> eliminate a timing issue (as I have a TS-421 RAID 5 NAS as a file server
> holding my master library and that replicates any changes in the library
> down to the new HS-453DX Music NAS using QNAP's sync application about
> 11pm each evening), however I've verified the files are on the Music NAS
> well before the scheduled scan, and if I leave it it discovers them 1 or
> 2 scans later as noted. I also have my older Vortexbox build and older
> copy of library on it - and it had similar issues, except ones it didn't
> find it would never find unless you cleared and rescanned everything
> from scratch...
> 
> 
> Yes, files play ok and paths are ok as well. Only issue was increased
> scan times (>5 min more) per scan. I do not have any issue with
> discovery of new files except for 1 time when I did a custom scan
> (custom scan plugin) before doing a nor
> 
> 
> 
> 
> 
> Again FWIW I have had a similar type of issue before with changing
> folder names (or even file names) - although have not had the specific
> deleting files repetition issue @Blackfiction refers to. In cases where
> I renamed folders or moved files to a newly created folder I would get
> the opposite - I'd have 2 entries in library as the orphaned entry would
> not get deleted - it seemed LMS didn't like it if the 'path' to the file
> for that entry vanished... if I straight out deleted files it would
> purge them from the library okay, but if I renamed the containing folder
> or otherwise 'broke' the path to the original file location it didn't
> always purge it from the library db. It also sometimes would then not
> pick up all the files in the new folder (or renamed folder) similar to
> the above. However a 'clear the db and rescan everything' would normally
> fix this (except for on a couple of occasions) - but this was on my
> Vortexbox a few years ago (2015?) so was when I was running the 7.6 or
> 7.7 official version and then the very first of the 7.9.x community
> enhanced versions - all on the latest version of Vortexbox at the time.
> 
> However in these cases where they don't delete you can still see the
> entry in the GUI which isn't what @Blackfiction is experiencing as I
> understand (@Blackfiction - after the scan you could play the files form
> library and their paths were showing as the correct paths- correct?). It
> does seem there is some unusual situation that can occur that involves
> changes to network or drive paths that confuses LMS...
> 
> Another test for @Blackfiction FWIW might be to rename the folder or
> such for a single album, then also rename a single file for that album
> (e.g. add 'test' to start of the file name) after the folder change and
> rescan - and see whether there are then 2 entries in the database for
> the artist/track - one in the old folder location with original name and
> one in the new folder location with the new file name?
> 
> (FWIW I notice similar in MediaMonkey - if you delete files and rescan a
> drive or folder it only sometimes detects they are gone - often you have
> to manually delete them from the library).
> 
> The other question for @Blackfiction is are you renaming a 'root'
> folder, or a subfolder of your root? i.e. the ones in red circle below
> (or upstream from them) - or just subfolders inside them. If you are
> doing the former are you adding it into the list below and removing the
> old one?
> 
> 28960
> 
> Alternatively when you renamed the folder in the options screen above -
> did you leave an old entry and put the new entry into the above screen
> for the first scan after doing it (assuming you changed a 'root' folder
> name)?

Files play ok and paths are ok as well. I renamed the root folder and
deleted the old one, just by typing/selecting the new one over the old
entry.



Living: EtherRegen -> Ultrarendu -> Benchmark DAC2 HGC -> Benchmark AHB2
-> ATC SCM19 v2 & Sennheiser HD650
Kitchen: SB Touch -> Audio Pro Addon T10 gen2
Kids rooms: SB Booms
Bedroom: SB Boom & SB Radio
Controls: iPeng, Material Skin & LMS via internet
Server: Windows 10 Pro with LMS 7.9.2
Spare: 2 SB Touch, 1 SB3, 2 SB Radio
------------------------------------------------------------------------
Blackfiction's Profile: http://forums.slimdevices.com/member.php?userid=20587
View this thread: http://forums.slimdevices.com/showthread.php?t=111385

_______________________________________________
Squeezecenter mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/squeezecenter

Reply via email to