*

================== QLogitechMediaServer version 2.20.00
================================= 05-04-2020

! In all versions Perl has been rebuild, and Perl check routine
changed.
Now should always try to uses highs Perl version possible and
available.
+ Added Perl version 5.30 on all version, excepted for arm-x09/arm-x19
LMS support for arm-x09/arm-x19 stop on Perl 5.21 or higher!.
+ If QLogitechMediaServer is started, and LMS starts will wait for it to
become ready, and gives a messages that its ready for uses.
Also in the QLogitechMediaServer,log will show how long LMS took
to start!
( Can be disabled by adding NOWAIT=1 in .QLMS.conf ! )
+ When QLogitechMediaServer ends, does some cleanup, when running in
sh-shell a messages regarding this will be shown!
+ When you use the update timer function, it stopped when there was a
update.
Changed this to keep check on updates on the interval !
! Old owner/rights output was strange, this is fixed.
! In the config output, the error on the Disc-space check was not clear,
changed it to clear messages.
! When using the config option, some commands take some time. Added a
messages to wait while they finish.
! On startup, the temp-directory was cleaned which some times could
cause trouble.
Fixed in this version.
! Changed some minor things in update/upgraded routines to make it more
future proved.
( Keep in mind, it can take some time. Especially if it handles
a Up-/Down- graded! Or when you’re Nas is busy with other task!)
! When using the Google-music plugin, startup took a long time, to check
and get the GMusicApi.
Tried to speed it up a bit, and now will show a messages on
check.
(On building notice that it works with GMusicApi 12.1.1, 13.0.0
or higher makes the plugin crash!)
( The Google-music plugin works on my QNap, at the time of
building!)
! Adjust the update check routine a bit, to make it more future prove.

!!! VERY IMPORTANT keep in mind, some times it can take a few minutes or
more, before LMS is completely started.
Especially when you're start/restart you're Nas-System, its
normal as its handling a lot commands.
Also keep in mind, depending on what already running, due to the
update check/upgrading LMS needs some time to start. ( Don't like it,
disable auto update )
So please take some time, before you think its not working,
( Want to check if its running do [./QlogitechMediaServer.sh
status]  in the .qpkg/LogitechMediaServer directory !)
( Keep in mind, errors regarding DISC I/O mostly come from low
disc space or if you uses a crypt-ed volume ! )

!!! VERY IMPORTANT on existing installations lower the 2.10.05 the
.QLMS.conf will be replaced by default new one.
( Existing/old one, will be renamed to .QLMS.config.old)
After installation there will not be a update done, so please
edit the .QLMS.conf to you're needs.
After restart will act normally again, and if set will auto
check UPDATE/NIGHTLY again.


Questions or trouble regarding LogitechMediaServer itself , go to the
SlimDevices forum website. 
http://forums.slimdevices.com

More information on MusicIP, go to https://www.spicefly.com/ or
http://forums.slimdevices.com

No need to uninstall any old lms installations, from version 2.00.00,
can be installed beside any other lms or perl installations.

'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)


*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 8.0.0 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.


'Thanks for the DONATIONS' (https://paypal.me/pools/c/8iYTFsTibV)*
------------------------------------------------------------------------
digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

_______________________________________________
Squeezecenter mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/squeezecenter

Reply via email to