digimaster wrote: > * > I am getting a lot off question regarding how to upgraded earlier > QLogitechMediaServer installations before V1.07. > So here will try to explain how you could make it upgraded through the > AppCenter from Qnap. > > There are two ways you could try, the first is to get a nice clean > installation. ( Which i suggest to do ) > With the second you keep you're already installed QLogitechMediaServer, > and after adjusting qpkg.conf will be part of the myapps from QnapClub > myapps. > > [ The First solution, recommend so you get a nice and clean > installation, with you're old settings !] > > Logon to you're Qnap nas system by a ssh shell. > Do [ cd /share/*/.qpkg/LogitechMediaServer/SlimServer ] > then [ cp -R Cache /share/Multimedia/Cache ] ( will take awhile to get > ready ), [ cp -R prefs /share/Multimedia/prefs ]. > Now go to the AppCenter from Qnap, and uninstall QlogitechMediaServer, > then reboot you're Qnap. ( just to be sure nothing is interfering ) > No if you don't have the QnapClub appstore, look on the site > 'https://www.qnapclub.eu' (https://www.qnapclub.eu/nl/howto/1) how to > add it. > Then go in the Appcenter, and QNap Club appstore, and look for > qlogitechmediaserver, should be under the entertainment section. > Install it from there, and when installed and running, do following. > Logon to you're QNap nas system again by ssh shell, do [ cd > /share/*/.qpkg/LogitechMediaServer/ ], [ ./LogitechMediaServer.sh stop > ]. > Then [ cp -R /share/Multimedia/Cache SlimServer/Cache/ ] , [ cp > /share/Multimedia/prefs SlimServer/prefs ]. > Now do [ ./LogitechMediaServer.sh restart ], which should give something > like QLogitechMediaServer was already stopped. > Also there will come a message "Starting LogitechMediaServer in > Background", then its started running again. > Be aware depending on how many plugins there are installed, can take a > time, before you can access the webgui, some times several minutes. > On a error messages do [ /bin/chown -R squeezeboxserver:everyone > SlimServer/ ] and [ /bin/chmod -R 0775 SlimServer/ ] > once again do [ ./LogitechMediaServer.sh restart ] > > Don't forget to do [ rm -r /share/Multimedia/Cache ] and [ rm -r > /share/Multimedia/prefs ] after its running again. > > Now you got a clean installation, which will get the upgraded through > the appstore from QnapClub. > So next time, can simply be upgraded through the web-interface from the > Qnap AppCenter. > > [ The second way, where you leave the QLogitechMediaServer config as it > is ] > > Make sure you got QnapClub appstore setup correctly in the Qnap > AppCenter. > 'https://www.qnapclub.eu' (https://www.qnapclub.eu/nl/howto/1) > Logon to you're QNap nas system by ssh shell, do [ cd /etc/config ] > First do [ cp qpkg.conf qpkg.conf.org ], to make a back if something > went wrong ! > Open qpkg.conf with you're favorite editor like vi/joe/jed/nano, and > find the section under [LogitechMediaServer]. > Then under the line Enable = TRUE, insert the line store = > b23c4c609ac7b04f6b6595e9f6bec8c4. > Now save the file, and go to the AppCenter from QNap, look under > QnapClub myapps. > There it should show-up, and can be upgraded through the webgui. > > After this upgrading goes through the webgui off Qnaps AppCenter, so no > need to do some like this anymore. > Keep in mind from now on, all the releases go through qnapclub.eu > website and there appstore. > Because for me its better to manage, and users easier to upgrade if a > newer version is available. > You could always download the latest version from there website, and do > the Manuel installation. > I will even keep using the forums to inform when a newer version is > available with a link to the file. > > And on any error while installing or startup, please read > PLEASE-READ-FIRST.txt first and look at the log-files and you're system > setup. > Most startup errors come from old installations from ssots/ssods or > perl/optware-perl setups. ( Most of you tried strange thing, to get > spotty to work ) > Also if you copied back old Cache/prefs directories, and then startup > give a error a corrupted plug-in. > Always tested it first before copying old settings back. > A advise is maybe use 'QOptware-NG' > (https://www.qnapclub.eu/nl/qpkg/550) as optware solution, i uses this > now for a long time beside QLogitechMediaServer. > > Hope you will enjoy LogitechMediaServer, like i do on my Qnap again. > And remember i tried to make a LogitechMediaServer installation, which > completely depends on the QNap QTS. > So it will survey a update/upgraded. > LogitechMediaServer will be updated by the slimdevices website. > > *
Hi digimaster, Sorry to bother you but I'm having trouble adding the QNAP Club to my QNAP TS-230 NAS and I was hoping that you might be able to help. When I add the QNAP Club (per the instructions on the Club site) nothing gets loaded onto the NAS; that is, there are no packages shown in the Club window of the App Center. If I exit the App Center and then reopen it the QNAP Club icon has disappeared, though the definition still exists in Settings/App Repository. I don't know if it has any bearing on this issue but it occurred to me that the Club's qpkg load process might be sensitive to QTS version... my NAS is running QTS 4.5.1.1495. I would be very grateful for any help or advice you could offer. Thanks. Jon ------------------------------------------------------------------------ athelney's Profile: http://forums.slimdevices.com/member.php?userid=70900 View this thread: http://forums.slimdevices.com/showthread.php?t=108702 _______________________________________________ Squeezecenter mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/squeezecenter
