> On Tue, 27 Jan 2004, PINEAU Olivier wrote: > > > Note : with eth0 and eth0.3 configuration, pinging on several interface > > works fine > > Depends on the switch brand if using tagged and untagged VLANs on the same > port works or not. If your switch supports it then there is no theoretical > problem in that area except for some security issues if used carelessly. > > Regards > Henrik
My switch cannot be configured untagged and tagged on the same vlan on the same port. (but tagged on one vlan and untagged on another vlan on the same port) When I talked about configuration with eth0 and eth0.3, it was with adequat switch configuration : ------------ port switch : tagged vlan3, tagged vlan2, tagged vlan1 routeur on vlan 3, interface eth0.3 users on vlan 2, interface eth0.2 users on vlan 1, interface eth0.1 eth0 : ifconfig 0.0.0.0 up ping works. With same configuration on my data serveur : samba and netatalk works fine to users --->Squid deserve request with maybe 10 minutes delay. --------- port switch : untagged vlan3, tagged vlan2, tagged vlan1 routeur on vlan 3, interface eth0 users on vlan 2, interface eth0.2 users on vlan 1, interface eth0.1 ping works. With same configuration on my data serveur : samba and netatalk works fine to users --->Squid works fine except weird issues with some websites (hotmail, yahoo!mail, ebay...) --------- port switch1 : untagged vlan3 port switch2 : untagged vlan2 port switch3 : untagged vlan1 routeur on vlan 3, interface eth0 users on vlan 2, interface eth1 users on vlan 3, interface eth2 ping works. With same configuration on my data serveur : samba and netatalk works fine to users --->Squid works fine No idea the reason... Olivier
