you receive from it. All you are doing by your actions is showing the world that you are a
complete prat. Grow up!
On 1 Feb 2004, at 1:49, [EMAIL PROTECTED] wrote:
--i've asked to be removed countless times. here's another message that i didn't want. it's really not that hard to remove somebody is it...
This is a forwarded message From: Koppen, Peter van <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Date: Tuesday, January 27, 2004, 9:44:05 AM Subject: [squid-users] 802.1Q and SQUID : bug ! Don't use them together
===8<==============Original message text===============
I don't have a full understanding of SQUID or of 802.1Q on Linux but what is do know
is regular .1Q configuration.
I see that you use the real Ethernet port eth0 for VLAN 3 and use a vlan for all the
other VLAN definitions. What is know of VLAN's this wil NOT work. Either you do not
use VLAN's or you just use VLAN's So to make this work you should define a VLAN
(VLAN3) for you gateway and not use the non-tagged etho interface.
This can be tested, the proxy itself should not be able to connect to the pages you
listed. nor be able to trace or ping beyond it's own interfaces.
Peter
On 21 Jan 2004 at 16:01, PINEAU Olivier wrote:
Hi !
I want to inform you that i have discover a bug with 802.1Q technologie and
SQUID.
802.1Q is for VLAN's : the module 8021Q is use to configure a network card to be present on different VLAN's (tagged port).
My previous installation was :
VLAN 3 on eth0 10.0.0.0/255.254.0.0 routeur SDSL (gateway) 10.0.0.1
VLAN 2 on eth0.2 (vconfig add eth0 2) 10.20.0.0/255.255.0.0
VLAN 1 on eth0.1 (vconfig add eth0 1) 10.10.0.0/255.255.0.0
With this configuration, i was ending weirds issues : i was not able to log
in hotmail, yahoo!mail, e-bay, or perform any transaction on net.
For exemple, with hotmail, the https transaction was done and recorded on
log, but the following url was not recorded in log and a basic error message
prompt on navigator (DNS error or serveur not found).
By despair, I change my network conf to use a different networdk card for
each VLAN and it's finally works.
So, don't use 8021Q module with SQUID !
NOTE : I use 8021Q for my data serveur (SAMBA and netatalk) and it works
fine
met vriendelijke groet,
-- Peter van Koppen
Functie : Specialist Netwerk- en systeembeheer Organisatie : Alfa-college E-mail : [EMAIL PROTECTED] TelefoonNr : +31(0)50-597 3054 GSM : +31(0)6-53223700
===8<===========End of original message text===========
-- Best regards,
mortbox mailto:[EMAIL PROTECTED]
======================================================================== =====
Graeme Wood Email: [EMAIL PROTECTED]
Unix Systems Support Phone: +44 131 650 5003
The University of Edinburgh Fax: +44 131 650 6552
======================================================================== =====
