On 9/12/2011 2:32 p.m., Jason Ianacone wrote:
I totally agree. Just hoping someone could say what exactly.
Without having provided any info on what those config files contain...
Problem #2 had to do with the hosts name redirecting the device name to the
ipv4 and ipv6 addresses. I have a unique name to the ipv4 and the problem went
away.
Then I was sort-of correct. One of the configs is blocking the IPv6
subnets on your LAN.
This could be the Squid config if you have not added in the LAN or
localhost IPv6 details. Or it could be the IPv6 firewall is still at
some default closed settings.
Amos
Sent from my iPhone
On Dec 8, 2011, at 3:41 PM, Amos Jeffries wrote:
On 9/12/2011 8:37 a.m., Jason Ianacone wrote:
I am running squid 3.1.8 (non-transparent) on a Tomato based router. I
connect to my router via SSH (PuTTY). In the GUI I have a tunnel setup
to forward port 444 to 3128. I have a couple of small problems that
bother me.
1. I run a WHS on my LAN. When I am connected to the
SSH and I type in 192.168.0.2 (the WHS) in Firefox, it connects no
problem. When I type in xxxx.homeserver.com, I get a connection refused
(146) error. I get the same error if I type in my WAN IP as well.
2. For my SSH tunnel setup, I have 444 forwarded to 192.168.0.1:3128. This
works perfect. If I change it to forward 444 to WNR3500L:3128, which is
my device name, I get an "access denied" error. So I am connecting to
the proxy, but it doesn't like it for some reason.
Any help would be appreciated.
This description reads as if you have configured the proxy or firewall to block
access via non-LAN IPs.
The help you seek is in the config files somewhere.
Amos
